Milwaukee M18 Fuel 2766-22 Bruksanvisning
Milwaukee
Skruvmaskin
M18 Fuel 2766-22
Läs gratis den bruksanvisning för Milwaukee M18 Fuel 2766-22 (16 sidor) i kategorin Skruvmaskin. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2.5 recensioner. Har du en fråga om Milwaukee M18 Fuel 2766-22 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/16

Cat. No. / No de cat.
2766-20, 2767-20
M18 FUEL™ HIGH TORQUE IMPACT WRENCH
CLÉ À CHOCS DE COUPLE ÉLEVÉ DE M18 FUEL™
LLAVE DE IMPACTO DE ALTO ESFUERZO DE TORSIÓN M18
FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

3
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, ush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specied in the instructions.
Charging improperly or at temperatures outside the
specied range may damage the battery and increase
the risk of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
IMPACT WRENCHES
• Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting
a “live” wire may make exposed metal parts of the
power tool “live” and could give the operator an electric
shock.
• Wear ear protectors when impact drilling. Expo-
sure to noise can cause hearing loss.
• Use only sockets and other accessories speci-
cally designed for use on impact wrenches and
drivers. Other sockets and accessories might shatter
or break causing injury.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Impacts per Minute Under Load (IPM)
C US
UL Listing for
Canada and U.S.
SPECIFICATIONS
Volts .............................................................. 18 DC
Battery Type .................................................M18™
Charger Type ................................................M18™
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Cat. No. 2766-20
.....................................................
Anvil Type ...................................... 1/2" Square-Pin
RPM ............................................................. 0-1800
IPM .............................................................. 0-2400
Cat. No. 2767-20
.....................................................
Anvil Type ....................................1/2" Square-Ring
RPM ............................................................. 0-1750
IPM .............................................................. 0-2100
FUNCTIONAL DESCRIPTION
1. 1/2" Square drive anvil with pin detent (2766-20)
2. Control switch
3. Trigger
4. 4-Mode drive control
5. LED
6. Handle
7. 1/2" Square drive anvil with friction ring (2767-20)
1
2
4
5
37
6
Produktspecifikationer
Varumärke: | Milwaukee |
Kategori: | Skruvmaskin |
Modell: | M18 Fuel 2766-22 |
Enhetsplacering: | Ingebouwd |
Typ av operation: | Knoppen |
Färg på produkten: | Wit |
Dörrgångjärn: | Rechts |
Inbyggd display: | Ja |
Vikt: | 61500 g |
Bredd: | - mm |
Djup: | - mm |
Höjd: | - mm |
Nettoskatt: | - W |
Barnlås: | Ja |
Ljudnivå: | 37 dB |
Årlig-energiförbrukning: | 235 kWu |
Förpackningens vikt: | 65300 g |
Förpackningens bredd: | 572 mm |
Djuppackning: | 622 mm |
Förpackningshöjd: | 1829 mm |
Energieffektivitetsklass (gammal): | A++ |
Frys bruttokapacitet: | 83 l |
Frys nettokapacitet: | 80 l |
Fryskapacitet: | 6 kg/24u |
Dörröppningsriktning utbytbar: | Ja |
Lämplig för paneljustering: | Ja |
Kylskåpets nettokapacitet: | 194 l |
Kylskåp med bruttokapacitet: | 201 l |
No Frost (kylskåp): | Nee |
Kylskåp invändig belysning: | Ja |
Typ av lampa: | LED |
Antal hyllor i kylskåp: | 5 |
Antal-grönsakslådor: | 1 |
Frysläge: | Onder |
No Frost (frys): | Nee |
Retentionstid vid strömavbrott: | 24 uur |
Snabbfrysfunktion: | Ja |
Antal fryshyllor: | 3 |
antal stjärnor: | 4* |
Total nettokapacitet: | 274 l |
Temperaturlarm: | Ja |
Äggställ: | Ja |
Flaskställ: | Ja |
Automatisk avfrostning (kylskåp): | Ja |
Total bruttokapacitet: | 284 l |
Installationsfackets bredd: | 560 mm |
Installationsfack djup: | 550 mm |
Installationsfack höjd: | 1772 mm |
Hyllmaterial: | Gehard glas |
Kylskåpsdörrfickor: | 3 |
Till fackområdet: | Nee |
Kraftkälla: | Electrisch |
Energianvändning per dag: | 0.642 kWh/24u |
Nuvarande: | 1.4 A |
Dörrpanel ingår: | Nee |
Klimaatklasse: | SN-T |
Justerbara fötter: | Ja |
Kylsystem: | Dynamisch (door de ventilator ondersteund) |
Genomgående öppningsvinkel: | 115 ° |
AC-ingångsspänning: | 220 - 240 V |
AC-ingångsfrekvens: | 50 Hz |
Type beeldscherm: | LCD |
Behöver du hjälp?
Om du behöver hjälp med Milwaukee M18 Fuel 2766-22 ställ en fråga nedan och andra användare kommer att svara dig
Skruvmaskin Milwaukee Manualer
30 December 2025
30 December 2025
26 December 2024
7 Oktober 2024
4 Oktober 2024
27 September 2024
26 September 2024
24 September 2024
23 September 2024
23 September 2024
Skruvmaskin Manualer
- Bruder Mannesmann
- Ryobi
- Parkside
- Hikoki
- Einhell
- Elu
- Trotec
- Meister Craft
- TAURUS Titanium
- Beta
- Facom
- Ferm
- Bavaria
- Porter-Cable
- Fein
Nyaste Skruvmaskin Manualer
13 Januari 2025
12 Januari 2025
8 Januari 2025
5 Januari 2025
5 Januari 2025
4 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025