Milwaukee M18 Fuel Surge 2760-22CT Bruksanvisning
Milwaukee
Inte kategoriserad
M18 Fuel Surge 2760-22CT
Läs gratis den bruksanvisning för Milwaukee M18 Fuel Surge 2760-22CT (16 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 2 recensioner. Har du en fråga om Milwaukee M18 Fuel Surge 2760-22CT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/16
Cat. No. / No de cat.
2760-20
M18 FUEL™ SURGE™ 1/4" HEX HYDRAULIC DRIVER
TOURNEVIS HYRDRAULIQUE À TÊTE HEXAGONALE
SURGE™ M18 FUEL™ DE 6 mm (1/4")
DESTORNILLADOR HIDRÁULICO HEXAGONAL SURGE™
M18 FUEL™ DE 6 mm (1/4")
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
3
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specied in the instructions.
Charging improperly or at temperatures outside
the specied range may damage the battery and
increase the risk of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES
FOR IMPACT DRIVER
AND IMPACT WRENCH
• Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the
operator an electric shock.
• Wear ear protectors when impact drilling. Expo-
sure to noise can cause hearing loss.
• Use only sockets and other accessories spe-
cically designed for use on impact wrenches
and drivers. Other sockets and accessories might
shatter or break causing injury.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sand-
ing, sawing, grinding, drilling, and
other construction activities contains chemicals
known to cause cancer, birth defects or other repro-
ductive harm. Some examples of these chemicals
are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to lter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Impacts per Minute Under Load (IPM)
Read Operator's Manual
C US
UL Listing for Canada and U.S.
SPECIFICATIONS
Cat. No. 2760-20
.....................................................
Volts .............................................................. 18 DC
Battery Type .................................................M18™
Charger Type ................................................ M18™
RPM .......................................................... 0 - 3 000
IPM ........................................................... 0 - 4 000
Recommended Ambient
Operating Temperature ......................0°F to 125°F
FUNCTIONAL DESCRIPTION
1. 1/4" Hex drive chuck
2. LED
3. Control switch
4. Trigger
5. Handle
6. Speed control
7. Belt clip
8. Auxiliary bit holder
8
1
2
4
3
7
5
6
Produktspecifikationer
| Varumärke: | Milwaukee |
| Kategori: | Inte kategoriserad |
| Modell: | M18 Fuel Surge 2760-22CT |
Behöver du hjälp?
Om du behöver hjälp med Milwaukee M18 Fuel Surge 2760-22CT ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Milwaukee Manualer
19 Mars 2025
22 Februari 2025
6 Februari 2025
8 Januari 2025
8 Januari 2025
30 December 2025
27 December 2024
15 December 2024
14 Oktober 2024
30 September 2024
Inte kategoriserad Manualer
- Hori
- Comprehensive
- Anslut
- Skymaster
- Ariete
- Mx Onda
- Swingline
- Harman Kardon
- Hammond
- Rothenberger
- T.I.P.
- GMB Gaming
- Krups
- HuddleCamHD
- Duux
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025