MoFi StudioTracker Bruksanvisning

MoFi Inte kategoriserad StudioTracker

Läs gratis den bruksanvisning för MoFi StudioTracker (7 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 6 recensioner. Har du en fråga om MoFi StudioTracker eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/7
4
6
7
5
1. StudioTracker Cartridge
with Stylus Guard
2. Stylus Cleaning Brush
3. Hex Driver
4. 2.5mm x 20mm Hex Screw (2)
5. 2.5mm x 18mm Hex Screw (2)
6. 2.5mm Nut (2)
7. 2.5mm Nylon Washer (2)
IN THE BOX
1
2
3
Red
White
Black
Green
Hex
Screws
Washers
Nuts
1. Connect the four headshell
leads, making sure the
color-coated leads match
the corresponding color-
coded pins.
2. Carefully mount cartridge
to the headshell. Let nut
rest against cartridge body
to allow thread to catch.
Tighten screws, leaving
the ability to make slight
adjustments.
SETUP
Keep stylus guard in
place during installation
to prevent damage to
the needle
1
2

Produktspecifikationer

Varumärke: MoFi
Kategori: Inte kategoriserad
Modell: StudioTracker

Behöver du hjälp?

Om du behöver hjälp med MoFi StudioTracker ställ en fråga nedan och andra användare kommer att svara dig