Monitor Audio Creator C3L Bruksanvisning
Monitor Audio
högtalare
Creator C3L
Läs nedan 📖 manual på svenska för Monitor Audio Creator C3L (11 sidor) i kategorin högtalare. Denna guide var användbar för 11 personer och betygsatt med 3.6 stjärnor i genomsnitt av 6 användare
Sida 1/11
Product Manual
Creator Series
Register your speakers using the QR code
or visit monitoraudio.com/registration
Register your Creator Series speakers
to ensure the best possible product and customer support
2
CAUTION: The Creator Series loudspeakers can only be ixed into plasterboard (dry-lined) or
suspended ceilings (in-ceiling models), with a thickness of up to 35mm (excluding the Super
Slim series, which can be ixed up to 15mm) and walls (in-wall models), with a thickness of up
to 30mm. Solid wall installation will require channelling out and framework constructed to
provide a structure for the Tri Grip dog legs to clamp to. For safety reasons, if you are unsure
of your ability to provide a secure and safe ixing, do not attempt to ix these speakers,
please obtain the services of a competent and qualiied trades person.
CAUTION: Ensure that there are no water pipes or electricity cables running within the wall
or ceiling structure before cutting the speaker apertures. Work from secure steps and avoid
trailing wires.
Do not over tighten the Tri-Grip Dog Leg clamps. Over tightening the clamping mechanism on
any in ceiling/ in wall speaker can result in damage to the speaker mounting hardware, ceiling/
wall or speaker frame, and/or delection in the speaker frame during installation.
If you notice any of the above during installation, you have over tightened the Tri Grip Dog Leg.
Back o the mounting screw until delection is reduced to allow the product to sit irmly against
the ceiling or wall.
IMPORTANT: Do not exceed 5Kgf/cm (4.34 lbf/inch.) or 0.5 NM when tightening
the Tri Grip dog leg screws.
When using a cordless screwdriver/ drill to install this product ensure the clutch is set to it’s
lowest setting to avoid over-tightening and damaging the mounting hardware.
Before you unpack your speakers, please make sure that there is plenty of available loor space.
Inside the carton, you will ind a cut-out template that you can use the mark and cut into your
ceilings or walls to the correct size, you’ll also ind your Quik-Link terminal and grille in the box.
Preparing your installation
Overtightening warning
Produktspecifikationer
| Varumärke: | Monitor Audio |
| Kategori: | högtalare |
| Modell: | Creator C3L |
Behöver du hjälp?
Om du behöver hjälp med Monitor Audio Creator C3L ställ en fråga nedan och andra användare kommer att svara dig
högtalare Monitor Audio Manualer
2 Februari 2025
14 Januari 2025
2 Januari 2025
18 December 2024
17 December 2024
26 Oktober 2024
25 September 2024
25 September 2024
25 September 2024
Monitor Audio Controlled Performance CP-WT380 Bruksanvisning
25 September 2024högtalare Manualer
- högtalare ANT
- högtalare Piega
- högtalare House Of Marley
- högtalare LD Systems
- högtalare Voxx
- högtalare Revel
- högtalare Pyle Pro
- högtalare Bolse
- högtalare QSC
- högtalare Xoopar
- högtalare Moonki
- högtalare Iharmonix
- högtalare Crunch
- högtalare JobSite
- högtalare Teufel
Nyaste högtalare Manualer
6 Juni 2025
6 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
3 Juni 2025
3 Juni 2025