Morphy Richards 131000 Bruksanvisning
Morphy Richards
vatten dispenser
131000
Läs gratis den bruksanvisning för Morphy Richards 131000 (12 sidor) i kategorin vatten dispenser. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 2 recensioner. Har du en fråga om Morphy Richards 131000 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12
3
Place a vessel underneath the Dispense Nozzles
(6) (5) and press the Dispense Button to reset the
system. This takes approx. 25 seconds. Any water
dispensed during resetting should be discarded.
5
(1)Press the Start/Stop Button , the Hot Water
Dispenser will pump 240ml of water into the
heating chamber and start to heat.
4
Using the Water Volume Dial , adjust the (2)
Dispense Volume to 240ml. Place a cup on the (15)
Drip Tray under the Dispense Nozzles . (8) (6)
6
When heated the water will automatically
dispense from the Dispense Nozzels into your (6)
cup.
1
Remove the Water Tank from the Main Unit (7)
(23). Remove the BRITA MAXTRA Cartridge and (19)
BRITA Hopper from the Water Tank. (21)
2
Fill the Water Tank with cold water and return to
your Hot Water Dispenser. Plug your Hot Water
Dispenser into the electrical socket.
Quick
Start
Guide
This quick start guide shows you the basic steps
for dispensing 240ml of hot water for a single
cup of tea or coffee. This quick start guide does
not detail the steps to use the BRITA Filtration
System.
For more detailed information on using your
new Hot Water Dispenser or BRITA Filtration
System, please read this instruction manual.
KT131000 MUK REV3.indd 7 24/03/2014 09:06
4
Resetting
The System
Before using your Hot Water Dispenser for the
first time, or after it has been unplugged from
the mains. You must perform the following steps
to reset your Hot Water Dispensers’ heating
chamber.
Your Hot Water Dispenser will not function
if the system has not been reset.
5
Place an empty vessel, such as a measuring jug
or saucepan underneath the Dispense Nozzles . (6)
6
Press the Dispense Button to reset the system.
Any remaining water will be dispensed from the
system into the vessel below. This takes
approximately 25 seconds. It is now ready for use.
3
Remove the Water Tank and fill with cold water.
Replace ensuring it is returned correctly into the
Main Unit . If using the BRITA Filtration System (23)
refer to the set up guide on page 5.
4
(5) The Dispense Button will flash and the
‘Dispense Icon’ will appear on the screen. (13)
1
Plug your Hot Water Dispenser into the mains
outlet and switch on at the socket. 2
If the Water Tank is empty, the Empty Tank (7)
Icon will illuminate and flash. (12)
25
seconds
KT131000 MUK REV3.indd 8 24/03/2014 09:06
BRITA filtration
Filtering your water improves the taste and
appearance of beverages by reducing limescale, lead,
chlorine and other impurities.
The BRITA MAXTRA Filter Cartridge offers improved
filtration due to MAXTRA Technology. The natural
MicroporeFilter in combination with the powerful
Protect Filter reduces chlorine and limescale for a great
natural taste and further reduces metals such as lead
and copper. Unique flow control ensures the perfect
filtration time for best results.
For maximum filter performance and for optimum
taste, it is important to change your BRITA MAXTRA
Filter Cartridge regularly. BRITA recommends that you
replace the cartridge every 4 weeks.
Using the BRITA filtration system is optional. If you do
not wish to use the filtration system, simply remove
the BRITA Hopper and MAXTRA Filter Cartridge (21) (19)
from the Water Tank .(7)
Filtering water through the BRITA Filtration System takes
roughly 4 minutes to filter 1.5L of water. You can use
the system while filtering, providing enough water has
filtered into the Water Tank.
Installing a BRITA MAXTRA Cartrige
1
Unwrap the BRITA MAXTRA Cartridge and immerse (19)
in water, gently shake to loosen any bubbles.
2
Push the BRITA MAXTRA Cartridge into place in the
BRITA Hopper.
3
Place the BRITA Hopper into the Water Tank.
Before returning the Water Tank to the Main Unit, fill
the BRITA Hopper with Cold Water and allow the
water to filter through the BRITA MAXTRA Cartridge.
Discard the filtered water. Repeat this step twice.
4
Fill the BRITA Hopper with fresh water and return the
Water Tank to the main unit. Your BRITA Cartridge is
ready for use with your Hot Water Dispenser.
BRITA Memo
The BRITA Memo measures the recommended (20)
time of use of your MAXTRA Filter Cartridge . The (19)
BRITA Memo is located in the top of the BRITA Hopper
(21).
To reset the BRITA Memo, please press and hold down
the Start Button on the Memo until all four bars appear
in the display and flash twice. The Cartridge Active
Indicator Light in the bottom right corner of the BRITA
Memo indicates that it is working. After four weeks,
all four bars will disappear and a flashing arrow will
indicate that the cartridge should now be changed.
After changing the cartridge, reset the Memo.
Replacing the
BRITA Memo
The BRITA Memo has a life of approximately 5 (20)
years. To remove the exhausted BRITA Memo, place a
screwdriver in the notch next to the BRITA Memo and
push it out. Please note that BRITA Memo should not be
removed for any other reason than to dispose of it.
More information on the use of BRITA filter cartridges
and the BRITA Memo can be found in the BRITA
information guide supplied with your hot water
dispenser.
Telephone our replacement parts helpline (0844 873
0726) for your new BRITA Memo. If you require
assistance on using your BRITA MAXTRA filter cartridge
or BRITA Memo, please call BRITA Customer Care team
on 0844 742 4800.
KT131000 MUK REV3.indd 9 24/03/2014 09:06
Produktspecifikationer
| Varumärke: | Morphy Richards |
| Kategori: | vatten dispenser |
| Modell: | 131000 |
Behöver du hjälp?
Om du behöver hjälp med Morphy Richards 131000 ställ en fråga nedan och andra användare kommer att svara dig
vatten dispenser Morphy Richards Manualer
21 Juli 2025
vatten dispenser Manualer
Nyaste vatten dispenser Manualer
18 Juli 2025
17 Juli 2025
5 Juli 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
31 Maj 2025
8 September 2024