Morphy Richards ComfiGrip 301017 Bruksanvisning

Morphy Richards Järn ComfiGrip 301017

Läs gratis den bruksanvisning för Morphy Richards ComfiGrip 301017 (6 sidor) i kategorin Järn. Guiden har ansetts hjälpsam av 26 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 13.5 recensioner. Har du en fråga om Morphy Richards ComfiGrip 301017 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/6

Dry ironing

Your iron can be used for dry ironing. Set the

steam switch

(2)

to ‘O’ and set the temperature

dial

(8)

as desired (see page 3).

You won’t need water in the tank unless using

the water spray or steam boost features

Vertical steam

Vertical steam is useful for removing creases

from hanging clothes, curtains, etc. Hold the iron

between 1cm and 2cm away from the item and

press the steam boost button

(3).

No drip system (certain models only)

This prevents water escaping from the soleplate

(7)

when the iron is too cold.

During use, the no drip system may emit a loud

click, particularly during heat-up or whilst

cooling down. This is perfectly normal and

indicates that the system is functioning correctly

Models without No drip system

Do not store the product with water in the tank

as water may leak from the soleplate

(7)

if you

forget to turn the steam switch

(2)

to ‘0’.

Remember to only turn the steam switch

(2)

steam when the control dial is set to a

temperature within the steam range.

Remember: the lower the temperature setting,

the lower the steam setting.

Life long anti-scale system (certain

models only)

This system reduces scale deposits and helps

prolong the life of the iron

Auto shut-off (certain models only)

The iron will automatically shut down if

stationary in the horizontal position for 1 minute,

or the vertical position for 8 minutes.

The auto shut-off indicator

(5)

will flash and an

intermittent beep will be audible.

Gently shake the iron to reactivate. The

temperature indicator light

(9)

will come on. Wait

for the iron to heat-up and continue ironing

Features of your iron

To clean a coated soleplate

Do not use scouring powder or solution as this

could cause damage to the coating.

In the unlikely event of any man-made fibre

fusing to the soleplate, set the iron at the MAX

position and pass it over a clean piece of cotton

which will draw the deposit off the surface.

IMPORTANT: Do not descale the soleplate with

descaling products, proprietary cleaning agents

or vinegar when flushing out the soleplate.

To clean the exterior

Allow the iron to cool and wipe over with a damp

cloth and mild detergent, then wipe with a dry

cloth.

When you have finished ironing, unplug and

empty all water from your iron and set the steam

switch at the ‘O’ position. When cool, store the

iron on its heel with the cord wrapped loosely

around the heel.

Emptying and storingMaintenance

RN40868MUK Rev4_IB 21/03/2013 09:19 Page 1

Produktspecifikationer

Varumärke:	Morphy Richards
Kategori:	Järn
Modell:	ComfiGrip 301017
Sladdlängd:	2.5 m
Vattentankens kapacitet:	0.350 l
Automatisk avstängning:	Nej
Mjukt grepp:	Ja
Modell:	Torr & Ångstrykjärn
Sprayfunktion:	Ja
Produktens färg:	Beige, Black, White
Sladdlös:	Nej
Anti-dropp funktion:	Ja
Flera ånginställningar för att passa varje klädesplagg:	Ja
Konstant ånga:	55 g/min
Ångpuffprestanda:	190 g/min
Ångpuff funktion:	Ja
Vertikal ånga för borttagning av veck på hängande tyg:	Ja
Wattal, strykjärn:	2600 W
Skydd mot kalkavlagringar:	Nej