Motorola Polaroid Insta-Share Printer Bruksanvisning
Motorola
Inte kategoriserad
Polaroid Insta-Share Printer
Läs gratis den bruksanvisning för Motorola Polaroid Insta-Share Printer (144 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 3 recensioner. Har du en fråga om Motorola Polaroid Insta-Share Printer eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/144

Let's get started
We'll guide you through attaching and using your Polaroid Insta-Share Printer Moto Mod™.
In this guide:
• “Attach and remove your Moto Mod”
• “Charge your Insta-Share Printer”
• “Load paper into your Insta-Share Printer”
• “Take a photo”
• “Print your photo”
• “Print a saved photo”
• “Print a photo from another app”
• “Peel and stick your photo”
• “Want more?”
Attach and remove your Moto Mod
Align the sides of your phone with the sides of the Moto Mod until they snap together.
When connected, you will feel a vibration, see a message on your screen and hear
asound.
Note: make sure your phone's camera lens aligns with the hole in the Insta-Share Printer
and the connectors are clean and dry. Also, remove your phone case if you use one.
To remove your Insta-Share Printer, lift up from the bottom pick out area.
Caution: do not remove your Insta-Share Printer by pushing the phone's camera lens,
asthat could damage your phone.
INSTA-SHARE
PRINTER
1
MD100I


Charge your Insta-Share Printer
Note: the fastest way to charge your Moto Mod is to plug the charger into your Insta-
Share Printer.
To charge, connect your Insta-Share Printer to a power outlet with a USB-C cable.
Alternatively, charge your device by attaching it to your phone and charging your phone.
Note: fully charge your Moto Mod using the charger that came with your phone.
Usingother chargers with a USB-C connector is not recommended and can slow
chargespeed. Avoid incompatible USB-B (micro USB) chargers and uncertified
adaptersand cables, asthey may damage your device.
Charge levels
Press the battery check button to check the charge level. The LEDs indicate the charge level.
LEDs Charge %
4 75 to 100
3 50 to 74
2 25 to 49
1 0 to 24
Note: your Insta-Share Printer must be charged at least 20% (or 2 LED lights) in order to print.
Battery check
button
Produktspecifikationer
Varumärke: | Motorola |
Kategori: | Inte kategoriserad |
Modell: | Polaroid Insta-Share Printer |
Enhetsplacering: | Vrijstaand |
Typ av operation: | Buttons, Rotary |
Färg på produkten: | Wit |
Dörrgångjärn: | Links |
Inbyggd display: | Ja |
Vikt: | 63000 g |
Bredd: | 600 mm |
Djup: | 510 mm |
Höjd: | 840 mm |
Typ av laddare: | Voorbelading |
Dörrfärg: | Wit |
Fördröjd starttimer: | Ja |
Startfördröjning: | 19 uur |
Barnlås: | Ja |
Energieffektivitetsklass (gammal): | A++ |
Tvätt energiförbrukning: | - kWu |
Vattenförbrukning per cykel: | - l |
Årlig tvättenergiförbrukning: | 170 kWu |
Ljudnivå (tvätt): | 58 dB |
Obalans kontrollsystem: | Ja |
Maximal centrifugeringshastighet: | 800 RPM |
Ljudnivå under centrifugering: | 70 dB |
Årlig tvättvattenförbrukning: | 8800 l |
Antal tvättprogram: | 11 |
Nominell kapacitet: | 6 kg |
Wasprogramma's: | Hygiene/anti-allergy, Black |
Behöver du hjälp?
Om du behöver hjälp med Motorola Polaroid Insta-Share Printer ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Motorola Manualer
6 Januari 2025
6 Januari 2025
6 Januari 2025
6 Januari 2025
8 December 2024
19 September 2024
3 September 2024
31 Augusti 2024
28 Augusti 2024
23 Augusti 2024
Inte kategoriserad Manualer
- Voigtlander
- Lezyne
- Tineco
- Wamsler
- VARI-LITE
- Liebherr
- Lapp
- Aqua Computer
- Xlyne
- ASSA ABLOY
- MPM
- Fujitsu
- Becken
- Söll
- Burris
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025