Moultrie NXT Hunter Feeder Kit Bruksanvisning
Moultrie
ej kategoriserat
NXT Hunter Feeder Kit
Läs gratis den bruksanvisning för Moultrie NXT Hunter Feeder Kit (4 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 7.5 recensioner. Har du en fråga om Moultrie NXT Hunter Feeder Kit eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
Instructions for NXT Hunter Feeder Kit
Thank you for your purchase of a Moultrie NXT Hunter Feeder Kit. Please read this sheet before operating
the unit. If you should have any questions about this product or any other Moultrie product, please contact
us using the information on the back of this sheet. Allow us to better serve you by activating your 1-year
warranty online at http://www.moultriefeeders.com/warranty
ATTENTION:
Always position safety switch to OFF position before
performing any maintenance or while setting up feeder
to avoid shock.
OPERATING ELECTRIC VARMINT GUARD
A
Electric Varmint Guard
There are two wires, one is positive and the other is negative. To maintain
Moultrie’s standard in high battery eciency, the guard is inactive until both
wires are rst touched at the same time. When both wires are touched a
second time, the circuit is completed, creating a shock.
If mounting the Moultrie Quick-Lock Feeder Kit to:
• a Moultrie 30 or 55-gallon barrel* or Moultrie 6.5-gallon bucket, refer to Section C.
• a Moultrie 30-Gallon Quick-Lock Hopper, refer to Section D.
• any other containers, please visit our website at www.moultriefeeders.com
STOP
READ THIS FIRST
BEFORE
PROCEEDING
ADJUSTING FUNNEL HEIGHT
B
ATTENTION: Make sure the electric varmint guard is turned OFF and
battery is disconnected before adjusting funnel!
Once the funnel is in desired position,
retighten the screw with Phillips-head
screwdriver. Do not over-tighten.
Adjusting the funnel height may be desired when
using dierent types or sizes of feed.
To adjust funnel height:
With a Phillips-head screwdriver,
loosen screw.
With screw loosened, use tabs to position funnel
in one of the two positions by either pushing
down or up depending on desired position.
Safety
Switch
Produktspecifikationer
| Varumärke: | Moultrie |
| Kategori: | ej kategoriserat |
| Modell: | NXT Hunter Feeder Kit |
Behöver du hjälp?
Om du behöver hjälp med Moultrie NXT Hunter Feeder Kit ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Moultrie Manualer
8 Oktober 2025
8 Oktober 2025
7 Oktober 2025
7 Oktober 2025
ej kategoriserat Manualer
- Steba
- Carel
- Inkbird
- Equator
- Ambient Weather
- Spracht
- CarPlayKits
- Cable Matters
- Weidmüller
- Kopul
- ADATA
- Grillmeister
- Innoliving
- Ceado
- Yamazen
Nyaste ej kategoriserat Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025