Mount-It! MI-7993 Bruksanvisning
Läs gratis den bruksanvisning för Mount-It! MI-7993 (7 sidor) i kategorin Tabell. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 12 recensioner. Har du en fråga om Mount-It! MI-7993 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
FOLDING WALL-MOUNTED
SHELF
MI-7993
MI-7993W
Please scan this QR code
to visit the product page.
Thank you for choosing Mount-It
2
3
Mount-It!
Mount-It!
Mount and Accessories
Left and Right Shelves
Shelf Connectors Bolts Lag Screws ScrewsConcrete Anchors
Middle Shelf Folding Arm Mounts
Missing Parts? Call us at (855) 925-5668 and we will ship replacement parts free of charge.
CHOKING HAZARD. Package includes small parts.
Not for children under 3 years. Adult supervision is required.
Check carefully to make sure there are no missing or defective parts. Some hardware provided may not
be used. Use the correct mounting hardware suitable for your installation.
DIMENSIONS & WEIGHT CAPACITY
Rated weight capacity is 33lbs for the mount.
Caution:
Ensure all mounting surfaces are capable of
holding the weight of your mount.
DO NOT EXCEED MAXIMUM LISTED
WEIGHT CAPACITY.
SERIOUS INJURY OR PROPERTY DAMAGE
MAY OCCUR!
7.2”
0.6”
45”
15”
15”
15.6”
5
4
• Lay the Left, Middle, and Right Shelves (#A, #B) upside down on a flat surface in the orientation shown
here so that Middle Shelf (#B) is in the center.
• Attach the Shelf Connectors (#D) across the shelf segments as shown using all 32 Bolts (#D) and tighten
until secure.
Note: If a shorter length shelf is desired, the left and right segments can be connected without the
middle segment for a 30” wide surface.
Connect the Shelf Segments
Step 2
• Unfold the Folding Arm Mounts (#C) until the two ends are fully extended and latch into place at a 90
degree angle.
Unfold the Arms
Step 1
Note: Follow this step for Concrete/Brick wall installation. For Wood Stud wall installation proceed
to step 4a.
• Place the Folding Arm Mounts (#C) on the bottom of the shelf, centered in the middle of the left and
right shelf segments as shown here. Position the back of the mounts to the rear of the shelves, ensuring
that the front of the brackets do not extend out over the front edge of the shelf.
• Once the position is decided secure the Folding Arm Mounts in place using the Screws (#H) through
the arms into the shelves, 4 per each arm mount.
Concrete/Brick Installation: Attach the Arms to the Shelf
Step 3
Step 3a
Produktspecifikationer
| Varumärke: | Mount-It! |
| Kategori: | Tabell |
| Modell: | MI-7993 |
Behöver du hjälp?
Om du behöver hjälp med Mount-It! MI-7993 ställ en fråga nedan och andra användare kommer att svara dig
Tabell Mount-It! Manualer
27 December 2024
24 September 2024
23 September 2024
23 September 2024
Tabell Manualer
- VTech
- Calligaris .com
- Woood
- Klarfit
- Black And Decker
- Bbf
- Florabest
- Step2
- BoConcept
- South Shore
- Early Settler
- Cool Head
- AXI
- Iceberg
- Yamazen
Nyaste Tabell Manualer
9 April 2025
3 April 2025
3 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
31 Mars 2025
14 Mars 2025
13 Mars 2025