Mount-It! MI-954 Bruksanvisning


Läs gratis den bruksanvisning för Mount-It! MI-954 (2 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 1.5 recensioner. Har du en fråga om Mount-It! MI-954 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Using 4 self-tapping
screws on each, attach
the casters to the base
of the Platform Dolly.
The screws may
require some force to
install, but do not
overtighten.
2
Note: The 4 swivel casters will be placed on each corner, and the
2 fixed casters will be placed in the middle of the platform base.
Place the Platform Dolly upside down on a solid surface
and align the casters over the rectangular indentations
in the positions shown below.
1
ASSEMBLY INSTRUCTIONS
PARTS LIST
Swivel Casters (x4) Fixed Position Casters (x2) Bungee Cord
Self-Tapping Screws (x24) Screw Driver Decorative Covers (x6) Platform Dolly Base
FOLDABLE PLATFORM DOLLY
MI-954
CUSTOMER SUPPORT
1 (855) 915-2666
support@mount-it.com
CLOSING
1 2 3
Ensure the platform
segments are pressed
back together fully.
If handle is extended,
press the button on the
end of the handle and
close the handle down to
its shortest setting. Lower
the handle back down
across the base and press
it into the indentation.
Reattach the bungee cord
hooks on the opposite
end of the Platform dolly
base to secure it
OPENING
321
Detach the ends of the
bungee cord and pull the
handle up and away from
the platform.
Extend the handle by
pressing the button on
top and raising it until it
latches in place.
To lengthen the platform
for larger loads, pull the
platform segments apart
until they are at the
appropriate length.
INSTRUCTIONS FOR USE


Produktspecifikationer

Varumärke: Mount-It!
Kategori: ej kategoriserat
Modell: MI-954

Behöver du hjälp?

Om du behöver hjälp med Mount-It! MI-954 ställ en fråga nedan och andra användare kommer att svara dig