MSR Whisperlite Universal Bruksanvisning

MSR Utegrill Whisperlite Universal

Läs gratis den bruksanvisning för MSR Whisperlite Universal (2 sidor) i kategorin Utegrill. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 12.5 recensioner. Har du en fråga om MSR Whisperlite Universal eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Pump

Body

Control

Valve

Assembly

Canister Fuel

Adapter

Canister Fuel

Adapter

Canister

Stand

Jet and

Cable Tool

Liquid Fuel

Adapter

Liquid Fuel

Adapter

Flame

Adjuster

Fuel Line

Retainer

Nut

Swivel

O- Rings

Fuel Tube

O- ring

Check

Valve

Fuel Pump

Groove

Pump

Seal

Plunger

Fuel Tube

Bushing

Pump

Cup

Plunger

Bushing

Plunger

Bushing

Tabs

Pot Supports/

Legs

Windscreen

Elbow

Burner

Head

Mixer

Tube

UK Jet

UG Jet

UC Jet

Shaker

Needle

Generator

Tube

Heat

Reflector

Catch

Arm

Priming

Cup

Priming

Wick

Rim

Detent

WARNING

WARNING WARNING

WARNING

Do not use this stove: (1) before reading and fully understanding this Instruction Manual; (2) if you are not prepared or comfortable attending to a burning and/or hot stove at all times; (3) if you observe

leaking fuel; or (4) if you observe any condition with the stove system or in the surrounding environment that would make operation of an open flamed device dangerous. Failure to follow these directions

can cause an unsafe situation leading to fire, burns, severe injury or death.

KNOW YOUR MSR ® WHISPERLITE ™ UNIVERSAL STOVE

Please familiarize yourself with the parts of your WhisperLite Universal stove and the fol-

lowing instructions before its use. Because this stove can accommodate different fuels, you

may need to exchange the preinstalled UC Jet and the Canister Fuel Adapter before using

this stove.

CONFIGURING STOVE FOR DIFFERENT FUELS

CHANGING THE JET

1. Fold Pot Supports/Legs.

2. Unscrew Priming Cup and remove Wick.

3. Remove Fuel Line from stove.

4. Loosen current Jet with Jet and Cable Tool.

Carefully unscrew Jet to avoid losing Shaker Needle inside the Elbow.

IMPORTANT: Do not bend Generator Tube while removing Jet.

5. Set new Jet carefully over the Shaker Needle and screw into place.

Gently tighten the Jet with Jet and Cable Tool.

6. Hold folded Pot Supports/Legs together and reinstall Fuel Line.

Replace Wick and rescrew Priming Cup to reassemble stove.

CHANGING THE FUEL ADAPTER

1. Loosen Retainer Nut on current Fuel Adapter with Jet and Cable Tool.

2. Unthread Retainer Nut and disconnect Fuel Adapter from Fuel Line.

3. Insert end of Fuel Line into new Fuel Adapter.

4. Gently tighten Retainer Nut with Jet and Cable Tool.

STOVE PREPARATION

FUEL BOTTLE PREPARATION

CONNECT STOVE CONNECT STOVE

TURN STOVE ON TURN STOVE ON

USE STOVE TO COOK USE STOVE TO COOK

TURN STOVE OFF TURN STOVE OFF

SET UP STOVE

The WhisperLite™ Universal stove

can be easily configured to burn

white gas and unleaded gas, kero-

sene, and canister fuels. Before stove

use, select the fuel and install the

appropriate Jet and Fuel Adapter.

(See )Fuel Information.

Unscrew

Priming Cup

Remove

Jet

Loosen

Retainer Nut

Tighten

Retainer Nut

Insert Fuel

Line

Use MSR® fuel bottles only. Non-MSR fuel bottles may leak fuel creating an unsafe situation leading to fire, burns, severe injury or death. Keep children far away from stove and fuel—Cascade

Designs, Inc. recommends no less than 10 feet (3+ meters). Never leave a burning or hot stove unattended. An unattended stove can lead to fire and/or a situation where children, pets, or the

unwary can be burned, injured, or killed. Use extreme caution when using stove in temperatures below freezing. In freezing temperatures O-rings can stiffen and leak fuel. Always check for fuel leaks

before and after pressurizing bottle, priming, and during and after lighting stove. Use of a leaking stove can cause fire, burns, severe injury or death.

Ensure that the WhisperLite™ Universal stove is configured with the correct Jet and Fuel Adapter. (See Stove

Preparation.) If using a liquid fuel, prepare the Fuel Bottle before using the stove. If using a canister fuel, skip this

panel and go now to Step 1, Set Up Stove.

PREPARING FUEL BOTTLE FOR LIQUID FUELS

1. Fill Fuel Bottle to fill line only.

Air space is necessary for fuel expansion.

2. Insert Pump into Fuel Bottle and firmly tighten.

3. Check Fuel Bottle for leaks pressurizing the bottle.before

4. Close the Control Valve, then stroke Plunger (20-30 strokes).

Pump until firm resistance is felt.

Less fuel requires more strokes or pressure.

1. Close Control Valve/Flame Adjuster

Valve.

2. Unfold the 3 Pot Supports/Legs.

Rotate Pot Supports/Legs fully open.

3. Place stove on the center of the Heat

Reflector.

Keep combustibles at least 4 feet (1.2 meters) away from the top and sides of a burning stove or a stove that you are in the process of lighting. Keep flammable liquids and vapors at least 25

feet (7.6 meters) away from the top and sides of a burning stove or a stove that you are in the process of lighting. This stove can ignite combustible materials, flammable liquids and vapors creat-

ing a situation where fire, burns, severe injury or death can result. This stove is designed for the outside (i.e., not within enclosure spaces of any kind, e.g., tents) and for the boiling of water or

cooking of food only—never use it for any other purpose. Use of stove within any enclosure or for a purpose other than boiling water or cooking food can cause fire, burns, severe injury or death.

Never overtighten fuel canister to stove. Overtightening can damage stove or canister and cause fuel to leak. Leaking fuel can cause fire, burns, severe injury or death. Use extreme caution when using stove

in temperatures below freeing. In freezing temperatures O-rings can stiffen and leak fuel. Always check for fuel leaks before and after lighting stove. Use of a leaking stove can cause fire, burns, severe

injury or death. Keep children far away from stove and fuel–Cascade Designs, Inc. recommends no less than 10 feet (3+ meters). Never leave a burning or hot stove unattended. An unattended stove can

lead to fire or a situation where children, pets, or the unwary can be burned, injured, or killed. The canister must be constructed and marked in accordance with the CAN/CSA 339.

1. Lubricate the entire brass end of Liquid Fuel Adapter with saliva or oil.

2. Completely insert brass end of Liquid Fuel Adapter into Pump.

Place Fuel Bottle on its side so Control Valve points up.

3. Secure Catch Arm on Fuel Pump Groove.

Keep Fuel Line straight for safety.

Keep Fuel Bottle as far away from stove as possible.

Use UG Jet and Liquid Fuel Adapter for white gas and unleaded auto gas.

Use UK Jet and Liquid Fuel Adapter for kerosene. (See Stove Preparation.)

Before every use, look for fuel on the fuel bottle, pump, fuel line, burner, and on the area beneath and

around stove. Do not light stove if you see or smell fuel. (See Troubleshooting.) Use of stove where

fuel has leaked or is leaking can cause fuel to ignite causing fire, burns, severe injury or death. Never

disconnect the fuel line, pump, or fuel bottle when stove is burning, hot, or near any open flame. Never

disconnect fuel line, pump, or fuel bottle when control valve is in an open (i.e., fuel flowing) position.

Disconnecting fuel line, pump, or fuel bottle when stove is burning, hot, or near any open flame, or

disconnecting fuel line, pump, or fuel bottle when control valve is in an open (i.e., fuel flowing) position

can lead to spilled fuel that can ignite and cause fire, burns, severe injury or death.

1. Unfold Flame Adjuster.

2. Close Flame Adjuster Valve on Canister Fuel Adapter.

3. Screw Fuel Canister onto Canister Fuel Adapter.

Use UC Jet and Canister Fuel Adapter for all canister fuels. (See Stove Preparation.)

1. Release only ½ spoonful of fuel.

Open Control Valve (3/4 turn) and let fuel flow through the Jet.

Close Control Valve.

Look for fuel in Priming Cup and on Wick.

2. Light fuel in Priming Cup.

A brief soccer ball-sized flame is normal.

3. Wait for preheat flame to reduce in size (approximately 2 minutes).

If flame goes out, wait 5 minutes for stove to cool before relighting.

4. Open Control Valve (1/2 turn) and wait for steady blue flame.

5. Slowly open Control Valve.

Never place your head or body above the stove while priming, lighting, or cooking. Because stove maintains an open flame, placement of head or body above stove is an unsafe practice that can cause

fire, burns, severe injury or death. Never use excess fuel to preheat stove. Use of excess fuel for priming can lead to leaking or spilled fuel that can cause fire, burns, severe injury or death. Never relight

a heated stove. Always let an extinguished stove cool for at least 5 minutes before relighting. Relighting a heated stove can cause large flames that can cause fire, burns, severe injury or death. Never

move a burning or hot stove. Always extinguish stove and cool for at least 5 minutes before moving. Moving a burning or hot stove can cause fire, burns, severe injury or death.

VAPOR FEED MODE (most conditions, best simmering)

1. Hold a lit match or lighter over the edge of Burner Head.

2. Open Flame Adjuster Valve (3/4 turn) to release and ignite fuel.

3. Turn Flame Adjuster Valve to produce and maintain steady

blue flame.

Never place your head or body above the stove while priming, lighting, or cooking. Because stove maintains an open flame, placement of head or body above stove is an unsafe practice that can cause fire, burns, severe

injury or death. Never relight a heated stove. Always let an extinguished stove cool for at least 5 minutes before relighting. Relighting a heated stove can produce large flames that can cause fire, burns, severe injury or

death. Never move a burning or hot stove. Always extinguish stove and cool for at least 5 minutes before moving. Moving a burning or hot stove can cause fire, burns, severe injury or death.

LIQUID FEED MODE (very cold conditions or higher output/faster boiling)

1. Attach Canister Stand onto top of Canister Fuel Adapter.

2. Hold a lit match or lighter over the edge of the Burner Head.

3. Open Flame Adjuster Valve (3/4 turn) to release and ignite fuel.

Allow fuel to burn for 30 seconds to sufficiently preheat stove.

4. Invert Fuel Canister, using Canister Stand to support it.

5. Turn Flame Adjuster Valve to produce and maintain steady blue flame.

IMPORTANT: ALWAYS START STOVE WITH FUEL CANISTER IN UPRIGHT POSITION TO PREVENT A LARGE FLARE-UP.

1. Set up Windscreen.

Fold the ends of Windscreen together.

Leave a 1-inch (2.5-cm) gap between Windscreen and pot for optimal

performance.

Ensure that combustion flow and ventilation air are free of any obstruction.

Use Windscreen to improve performance in all conditions.

2. Add appropriate food or liquid to cookware.

3. Place cookware onto center of stove.

4. Maintain Fuel Bottle pressure.

Add approximately 10 strokes every 10 minutes to maintain

performance.

Hold Fuel Bottle firmly while pumping.

Keep fuel bottle away from the stove burner and other heat sources. Position connected fuel bottle so that it is as far away from the burner as possible. Use of bottle near burner or other heat sources

can result in the fuel bottle exploding and causing fire, burns, severe injury or death. Never place Windscreen around fuel bottle. Never use cookware with a diameter greater than 10 inches (25

centimeters). Never place and operate two or more stoves together. Never operate stove with empty or dry cookware. Never use non-MSR ® reflectors or diffusers. Use of stove in any of the preceding

manners can result in the fuel bottle exploding and causing fire, burns, severe injury or death. Never use cookware of any size that is ill-suited or inappropriate for use with stove or stove pot supports

(e.g., cookware with a convex or concave bottom, some enameled cookware, etc.). Use of stove with ill-suited and/or inappropriate cookware can result in cookware and/or stove instability and a

situation where hot cookware and/or cookware contents can spill and cause fire, burns, severe injury or death. Cascade Designs, Inc. warrants the use of appropriately sized MSR ® brand cookware

only—use of cookware other than MSR ® brand cookware will be at user’s own risk and discretion.

1. Set up Windscreen.

Fold the ends of Windscreen together.

Leave a 1-inch (2.5-cm) gap between

Windscreen and pot for optimal perfor-

mance.

Ensure that combustion flow and ventilation

air are free of any obstruction.

Use Windscreen to improve performance in

all conditions.

2. Add appropriate food or liquid to cookware.

3. Place cookware onto the center of stove.

Never use cookware with a diameter greater than 10 inches (25 centimeters). Never place and operate two or more stoves together. Never operate stove with empty or dry cookware. Never use non-MSR ®

reflectors or diffusers. Use of stove in any of the preceding manners can result in the fuel canister exploding and causing fire, burns, severe injury or death. Never use cookware of any size that is ill-suited

or inappropriate for use with stove or stove pot supports (e.g., cookware with a convex or concave bottom, some enameled cookware, etc.). Use of stove with ill-suited and/or inappropriate cookware can

result in cookware and/or stove instability and a situation where hot cookware and/or cookware contents can spill and cause fire, burns, severe injury or death. Cascade Designs, Inc. warrants the use of

appropriately sized MSR ® brand cookware only—use of cookware other than MSR ® brand cookware will be at user’s own risk and discretion.

1. Close the Control Valve.

Residual flame will continue to burn with a small flame.

2. After flames are out, wait 5 minutes for stove to cool.

3. Unlock Catch Arm and remove Fuel Line from Pump.

4. Depressurize Fuel Bottle and repack stove.

Hold Fuel Bottle upright, away from your face and

any sources of heat or ignition.

Slowly unscrew pump to depressurize Fuel Bottle.

NOTICE: To transport the Fuel Bottle, the Pump may be left

inside a depressurized Fuel Bottle. The Pump can also be

removed and replaced with the Fuel Bottle Cap.

Always store fuel bottle with cap securely tightened where it cannot be accessed by children. Storage of fuel bottle with loose cap and easy accessibility by children can result in a child opening the

fuel bottle and accessing bottle contents. Exposure to or ingestion of bottle contents can cause poisoning, severe injury, or death. Always store fuel bottle in a well-ventilated location away from any

possible heat or ignition source, such as water heaters, stoves, pilot lights, or furnaces. Storing bottle near any heat or ignition source can result in the fuel bottle exploding and causing fire, burns,

severe injury or death.

1. Place the Fuel Canister in the upright position if inverted.

2. Close the Flame Adjuster Valve.

Residual flame will continue to burn with a small flame.

3. After flames are out, wait 5 minutes for stove to cool.

Remove Canister Stand if attached.

Fold Flame Adjuster Valve.

4. Ensure that burners are extinguished.

Fold Pot Supports/Legs.

5. Move stove assembly away from any ignition sources and unscrew

Fuel Canister.

A small amount of gas may escape when unscrewing canister.

If canister is completely empty of fuel, follow proper disposal

requirements in your local area.

Always disconnect stove from canister before storing it. Failure to disconnect stove from canister before storing may allow fuel to leak and cause fire, burns, severe injury or death. Always store fuel canisters

in a well-ventilated location away from any possible heat or ignition source, such as water heaters, stoves, pilot lights, or furnaces, or where temperatures exceed 120 F (49 C). Storing fuel canisters near

any heat or ignition source or where temperatures exceed 120 F (49 C) can result in the canister exploding and causing fire, burns, severe injury or death.

Stroke

FULL

20-3 0 Stroke s

1/2 F ULL

30-4 0 Stroke s

FILL

LINE

AIR

FUEL

4-ft. (1.2-m) MIN.

DISTANCE from

COMBUSTIBLE