MXR EVH Phase 90 Bruksanvisning

MXR ej kategoriserat EVH Phase 90

Läs gratis den bruksanvisning för MXR EVH Phase 90 (2 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2 recensioner. Har du en fråga om MXR EVH Phase 90 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
92503003509 revB
POWER
The EVH Phase 90 is powered by
one 9 volt battery (remove bottom
plate to install), a 9 volt AC adapter
such as the Dunlop ECB003/
ECB003EU, or a power supply
such as the DC Brick
DESCRIPTION
• Deep, rich phasing
• SCRIPT switch toggles
between old school and
modern phase sounds
• Custom EVH paint job
DIRECTIONS
• Run a cable from your guitar to
the EVH Phase 90’s INPUT jack
and run another cable from the
EVH Phase 90’s OUTPUT jack
to your amplier.
• Start with the SPEED knob at
12 oclock.
• Turn the eect on by depressing
the footswitch.
SPECIFICATIONS
Input Impedance 1 MΩ
Output Impedance 10 kΩ
Signal to Noise* >96 dB
Bypass Hardwire
Current Draw 8.2 mA
Power Supply 9 volts DC
*A-weighted, Vref = 1 Vrms
• Rotate the SPEED knob
clockwise for a faster phase
eect or counterclockwise
for a slower phase eect.
• Leave the SCRIPT switch out for
modern Block logo phase sounds
or push it in for vintage Script
logo phase sounds.
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
CONTROLS
SCRIPT switch engages
Script mode
SPEED knob controls
overall eect rate
FOOTSWITCH toggles
eect on/bypass (blue
LED indicates on)
EVH90 PHASE 90

Produktspecifikationer

Varumärke: MXR
Kategori: ej kategoriserat
Modell: EVH Phase 90

Behöver du hjälp?

Om du behöver hjälp med MXR EVH Phase 90 ställ en fråga nedan och andra användare kommer att svara dig