Nec GT6000R Bruksanvisning

Läs gratis den bruksanvisning för Nec GT6000R (5 sidor) i kategorin Beamer. Guiden har ansetts hjälpsam av 33 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 8 recensioner. Har du en fråga om Nec GT6000R eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

NEC Solutions (America), Inc.

Visual Systems

GT6000R Installation Guide

With 1.0:1 Rear Lens v1.5

Contents

Product Description, Lens Specs, Notes and Formulas Page 1

Diagrams and Distance Charts Page 2

Cabinet Dimensions

Top, Front and Right Side Page 3

Bottom, Back and Left Side Page 4

Control Codes Page 5

Product Description

Type: 3 panel LCD/Dual Lamp Projector Dimensions: 20.4”(W) x 9.5”(H) x 21.8”(D)

1.4” p-Si TFT w/MLA Weight: 41.7 lbs (w/GT10RLB lens)

Native Resolution: 1400x1050 (SXGA+) Brightness: 1000 ANSI single lamp / 2000 ANSI dual lamp

Network Ready, integrated wired network adapter Power Focus

Lens Specifications

GT10RLB Throw Ratio: 1.0:1(approx.) Focal Length: 28.9mm

Screen Sizes: 40”-250” F/#: 2.4

Note: Lens shift is not available on the GT10RLB rear lens. The GT6000R should be used only for “zero degree/no-offset” rear

projection applications.

Note: There are no other optional lenses available for the GT6000R. The GT6000R ships from the factory with the GT10RLB lens.

Notes

• For screen sizes not indicated on the projection charts, use the formulas below.

• If a value in a chart does not match the results of the formulas, use the values in the chart.

• The ceiling must be strong enough to support the projector and the installation must be in accordance with any local

building codes.

• All formulas are based on a 4:3 aspect ratio and screen.

• 4:3 sources can be displayed on a 16:9 screen without vertical “squeezing”, see “Aspect Ratio” in the user manual.

• The replacement lamp for the GT6000R is the long life lamp GT60LPS only.

• Distances are in inches, for millimeters multiply by 25.4.

• ±Distances may vary 5%.

Formulas (for a 4:3 screen)

Units: Inches (for millimeters multiply final number by 25.4)

Definitions:

Projection Formula: H = Horizontal Screen Width (4:3)

C = 1.0034H – 2.087 V = Vertical Screen Height (4:3)

C = Throw Distance

Screen Formulas:

H = Screen Diagonal x 4/5

V = Screen Diagonal x 3/5

Screen Diagonal = H x 5/4

Note:Tilting the front of the projector up or down by more than 45° from level could reduce lamp life by up to 20%.

www.necvisualsystems.com GT6000R Page 1 of 5

Produktspecifikationer