Nec MultiSync FE700M Bruksanvisning

Nec Övervaka MultiSync FE700M

Läs gratis den bruksanvisning för Nec MultiSync FE700M (8 sidor) i kategorin Övervaka. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 3.5 recensioner. Har du en fråga om Nec MultiSync FE700M eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/8
English
0
5
25
75
95
100
0
5
25
75
95
100
Contents
The audio base contains the following additional items.
Audio Base
Captive Audio Cable
Audio Base Manual
Power Cord
Quick Start
If the audio base is not attached to the monitor, please use the following
steps to attach the audio base to the monitor.
If the audio base is already attached to the monitor proceed to Step 1-B.
MAKE SURE THE MONITOR IS DISCONNECTED FROM THE
SYSTEM AND IS UNPLUGGED FROM THE WALL OUTLET
BEFORE ANY WORK IS DONE ON THE MONITOR.
STEP 1-A. With the monitor unplugged from your system and the
wall outlet, carefully turn the monitor upside down on a
firm table (Figure 1-A).
STEP 2-A. Position the locking
tabs on the audio
base with the holes
in the monitor and
slide the audio base
in place (Figure 2-A).
Firm Table Top of monitor
Bottom of
monitor
Figure 1-A
E - 1
0
5
25
75
95
100

Produktspecifikationer

Varumärke: Nec
Kategori: Övervaka
Modell: MultiSync FE700M

Behöver du hjälp?

Om du behöver hjälp med Nec MultiSync FE700M ställ en fråga nedan och andra användare kommer att svara dig