Nec MultiSync ME651 Bruksanvisning

Nec Övervaka MultiSync ME651

Läs gratis den bruksanvisning för Nec MultiSync ME651 (5 sidor) i kategorin Övervaka. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 3.9 stjärnor baserat på 2 recensioner. Har du en fråga om Nec MultiSync ME651 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/5

Quick Start Guide

AirServer® Embedded Screen Mirroring Solution

1. e Installing th MPi4 Kit AirServer

For installation and usage instructions of the MPi4 Kit AirServer, refer to the setup guide of the Raspberry Pi Compute Module 4.

https://assets.sharpnecdisplays.us/documents/installationguides/nec_raspberry_pi_compute_module4_setup_guide.pdf

2. Connections

Plug in an Ethernet cable to the LAN port of the MPi4 Kit AirServer.

NOTE recommend Ethernet: AirServer works using Wi-Fi or without network connectivity, but we for optimal performance.

3. Turn on the NEC display and select the correct source

Once the display is turned on select the source COMPUTE MODULE on the remote control. There the AirServer Quick Setup screen will ,

be displayed.

4. AirServer Quick Setup

To start the configuration, follow the on-screen instructions.

If the AirServer Raspberry Pi Compute Module 4 (MPi4 Kit AirServer) is connected to a network using an Ethernet cable, Quick Setup can

be done through a web browser on a computer or mobile device on the same network. Type in the IP address shown in the instructions and

at the bottom left of the homescreen. Once the Device Management page has loaded, type in the setup PIN to get started.

If the MPi4 Kit AirServer is not connected using an Ethernet cable, you must first connect a computer or a mobile device to the Guest Wi-Fi

shown in the Guest Access section on the on-screen menu. You can then type the IP address shown in the instructions into your browser

to start the Quick Setup.

The Quick Setup guides you through the basic settings for the MPi4 Kit AirServer:

▪ Password protection for Device Management

▪ Device/Room name

▪ Homescreen layout

▪ Country

▪ Language

▪ Time zone

▪ Screen mirroring preferences

Once setup is completed, all settings can be accessed by selecting Advanced Settings. The on-screen display will no longer show the

Quick Setup instructions.

It is recommended to log into advanced settings and check for updates in the Updates section, as new firmware may be available.

5. Recommended Display Settings

5.1. Make AirServer your DEFAULT INPUT

1. Open the monitor OSD using the remote control and select

▪ INPUT »

▪ INPUT SETTINGS » CUSTOM DETECT

2. Set the INPUT PRIORITY as follows:

1. DisplayPort

2. HDMI1

3. COMPUTE MODULE

5.2. Enable QUICK START for AirServer running on the MPi4 Kit AirServer*

1. Open the monitor OSD using the remote control and select

▪ PROTECT » POWER SAVE SETTINGS

2. Set QUICK START to ENABLE

*When Quick Start is enabled, the monitor will quickly return to the ON state when a signal is detected. Enabling

this option increases standby power consumption.

5.3. Enable CEC (Consumer Electronics Control)

This setting will automatically wake- -by mode once someone is trying to connect a device to AirServer. up the display from stand

1. Open the monitor OSD using the remote control and select

▪ INPUT » INPUT-ADVANCED » CEC

2. Set CEC to MODE1

If you need help, you can find additional information on . www.airserver.com/support

Produktspecifikationer

Varumärke:	Nec
Kategori:	Övervaka
Modell:	MultiSync ME651
Färg på produkten:	Zwart
Vikt:	72.9 g
Bredd:	62 mm
Djup:	101 mm
Höjd:	36 mm
Kraftkälla:	Batterijen
Bluetooth-version:	5.0
Vormfaktor:	Rechtshandig
Frekvensband:	2.4 GHz
Antal batterier/batterier som stöds:	2
Bluetooth Low Energy (BLE):	Ja
Avsedd för:	Gamen
Stöder Windows:	Windows 10, Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 IOT Core, Windows 10 Pro, Windows 10 Pro x64, Windows 10 x64
Förvaringsväska:	Ja
siffra:	1
Antal knappar:	5
Förbindelse:	RF-draadloos + Bluetooth
Ytfärg:	Monochromatisch
Rulla typ:	Knoppen
Rörelseupplösning:	7200 DPI
Medföljande mottagare:	Ja
Typ av knappar:	Drukknoppen
Rörelsedetekteringsteknik:	Optisch
Antal scrollhjul:	1
Rulla vägbeskrivningar:	Verticaal
Trådlöst mottagargränssnitt:	USB Type-A
Batterier-ingår:	Ja
Batteriteknik:	Alkaline
Batterityp:	AA
Harmoniserad systemkod (HS):	84716070
Justerbar avfrågningshastighet:	Ja
Justerbar rörelseupplösning:	Ja