Nec PlasmaSync 50XM3 Bruksanvisning

Nec Övervaka PlasmaSync 50XM3

Läs nedan 📖 manual på svenska för Nec PlasmaSync 50XM3 (62 sidor) i kategorin Övervaka. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/62

NEC plasma display

External Control Manual

(for PX- -42XM2/PX 50XM3/PX-61XM2)

Application

These specifications are applicable to NEC plasma monitors and

communications control from external equipment.

"Please also support the command of VP series and refer to the manual of the

conventional model about specification."

Connections

Connections should be made as described below.

1) Connector on the plasma monitor side: EXTERNAL CONTROL connector.

Type of connector: D- -Sub 9 pin male

No.

Pin Name

1 No Connection

2 RXD (Receive data)

3 TXD (Transmit data)

4 DTR (DTE side ready)

5 GND

6 DSR (DCE side ready)

7 RTS (Ready to send)

8 CTS (Clear to send)

9 No Connection

plasma monitor

External equipment

e.g., Personal computer

2) Connector on the external equipment side: Serial port (RS-232C) connector.

See the specifications of the equipment that is to be connected for the type of

connector and the pin assignment.

3) Wiring

 Use a crossed (reverse) cable.

 Wire the cable so that each pair of data lines cross between the two devices.

These data line pairs are RXD (Receive data) and TXD (Transmit data), DTR

(DTE side ready) and DSR (DCE side ready), and RTS (Ready to send) and CTS

(Clear to send).

Communication Parameters

(1) Communication system Asynchronous

(2) Interface RS-232C

(3) Baud rate 9600 bps

(4) Data length 8 bits

(5) Parity Odd

(6) Stop bit 1 bit

(7) Communication code Hex

Produktspecifikationer

Varumärke:	Nec
Kategori:	Övervaka
Modell:	PlasmaSync 50XM3
Vikt:	293.8 g
Bredd:	76 mm
Djup:	127 mm
Höjd:	42 mm
Hållbarhetscertifikat:	RoHS
Antal per paket:	54 stuk(s)
Inspänning:	90 - 264 V
Uteffekt:	65 W
Spännande:	5 V