Nec ST-EX2023 Bruksanvisning
Nec
Platt panelstöd
ST-EX2023
Läs gratis den bruksanvisning för Nec ST-EX2023 (2 sidor) i kategorin Platt panelstöd. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 10 recensioner. Har du en fråga om Nec ST-EX2023 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
ST-EX2023 Installation Instructions / Instructions d'installation / Montageanweisung /Instrucciones de instalación /
Istruzioni di installazione / 取扱説明書 / 安装说明书
English
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
Français
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
Deutsch
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
Español
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
Italiano
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
日本語
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
简体中文
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
1234
AB
English
1
2 3
Français Deutsch
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Unit: mm
Weight: ??
Weight: ??
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Unité: mm
Poids: ??
Poids: ??
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Einheit: mm
Gewicht: ??
Gewicht: ??
Español
日本語
Italiano
简体中文
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Unidad: mm
Peso: ??
Peso: ??
For EX201W For EX231W / EX231Wp
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Unità: mm
Peso: ??
Peso: ??
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
单位 : mm
重量 : ??
重量 : ??
Weight: ?? Weight: ??
単位 : mm
Produktspecifikationer
| Varumärke: | Nec |
| Kategori: | Platt panelstöd |
| Modell: | ST-EX2023 |
Behöver du hjälp?
Om du behöver hjälp med Nec ST-EX2023 ställ en fråga nedan och andra användare kommer att svara dig
Platt panelstöd Nec Manualer
15 Oktober 2024
2 Oktober 2024
15 September 2024
15 September 2024
27 Augusti 2024
22 Augusti 2024
22 Augusti 2024
18 Augusti 2024
17 Augusti 2024
16 Augusti 2024
Platt panelstöd Manualer
- Dataflex
- Heckler
- CTA Digital
- Bretford
- LTN Technologies
- GPX
- Anywhere Cart
- Zaor
- Digitus
- AMX
- Marantz
- Wentronic
- Fellowes
- Ergotron
- Konig
Nyaste Platt panelstöd Manualer
8 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025