Nedis ANOR5G20WT Bruksanvisning
Nedis
Inte kategoriserad
ANOR5G20WT
Läs gratis den bruksanvisning för Nedis ANOR5G20WT (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 6.5 recensioner. Har du en fråga om Nedis ANOR5G20WT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
3G /4G LTE / 5G Outdoor External Antenna
ANOR5G20WT
INTRODUCTION
Thank you for choosing our 5G high gain directional external antenna. This antenna is designed to enhance the performance and signal strength
of your 5G-enabled devices. Please read this manual carefully before installing and using the antenna to ensure optimal performance. Compact
and stylish housing, it can be accompany with your cpe and sim card router or Cell Phone Signal Boosters.
Technical Specications:
• Covered Services: 3G / 4G / 4G LTE / 5G
• Frequency: 698 - 960 / 1710 - 2700 / 3300 - 3600 / 4800 - 5000 MHz
• Gain: 4~6 dBi
• High Directionality
• Cable xed at antenna RG58U 1 ft N-type connector
• 2 x 2.50M LMR200 cable xed at antenna with SAM-male connector
• Waterproof : IPX3
• Anti-UV housing
• Pole installations method
PACKAGE CONTENT
Please check the content before your installation
1. Antenna x 1 pc
2. 2.5m LMR200 Cable x 2 pcs
3. Installation Materials
4. Manual x 1 pc
INSTALLATION
Outdoor Pole Mounted Installation
Step 1. Read this manual, ideally from start to nish, so that you understand the whole Installation process before you begin.
Step 2. Choose a suitable location for antenna installation with a clear line of sight to the 4G LTE or 5G cellular towers. Use the provided
mounting kit to secure the antenna. Ensure a stable and secure mount to prevent movement or damage. For optimal performance, it is
recommended to install the antenna outdoors.
Step 3. Locate a wooden pole or metallic pole.
Step 4. Fix the Antenna with the pole by using the supplied installation materials. Connect the LMR 200 cable to the short cable on the antenna.
Step 5. Connect the other end of the LMR200 cable to the 4G or 5G device's antenna port. The device could be a 4G LTE or 5G CPE (Customer
Premises Equipment), SIM card router, or cell phone Signal Boosters. Ensure a secure and snug connection to minimize signal loss.
Step 6. Adjust the antenna direction for maximum signal strength. Use a compass or refer to your device's signal strength indicator to nd the
optimal direction. Gradually adjust the antenna angle and direction, checking the signal strength periodically. Ensure a secure and snug
connection to minimize signal loss.
Maintenance and Care:
Regularly inspect the antenna for any signs of damage, corrosion, or loose connections.
Troubleshooting:
If experiencing signal issues, recheck the antenna connection and directional alignment. Ensure there are no obstructions blocking the antenna's
line of sight to the cellular tower .
Compliance and Safety Guidelines:
Comply with local regulations and safety standards during installation.
Do not attempt to modify or disassemble the antenna.
Ensure that the installation location is safe and secure.
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch – The Netherlands
service@nedis.com
Produktspecifikationer
| Varumärke: | Nedis |
| Kategori: | Inte kategoriserad |
| Modell: | ANOR5G20WT |
Behöver du hjälp?
Om du behöver hjälp med Nedis ANOR5G20WT ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Nedis Manualer
6 April 2025
2 April 2025
17 Mars 2025
17 Mars 2025
17 Mars 2025
17 Mars 2025
20 Februari 2025
15 Januari 2025
14 Januari 2025
14 Januari 2025
Inte kategoriserad Manualer
- Seecode
- Catalyst
- Multibrackets
- Absco
- Avteq
- Dobot
- Bestar
- Coleman
- Loewe
- Snom
- Century
- Apa
- Ledlenser
- AYA
- GeoBox
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025