Nedis DOORS10BK Bruksanvisning

Läs gratis den bruksanvisning för Nedis DOORS10BK (2 sidor) i kategorin dörrklocka. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 3 recensioner. Har du en fråga om Nedis DOORS10BK eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Package & Accessories

IncludedQuantityMarkRemark

Indoor Monitor1A

Indoor monitor with LCD screen

Screw4B

Two pairs depending on thickness

of the door

Outdoor Camera

1C

The ribbon cable will go through

Peephole to connect Indoor Part

Steel Braet1Dck

Use screraet w to fix the steel bck

with Outdoor part

User Manual1

Door

D. Steel Bracket

A. Indoor monitor

B. Fixing screws

Ribbon cable

Drill Hole in door

C. Outdoor camera

13-20mm

3x

Smart Peephole Viewer/

Visual Doorbell User Manual

You will need

0104

123

07

0205

0306

Technical Specications

Recycling

This symbol is known as the ‘Crossed-out Wheelie Bin Symbol’.

When this symbol is marked on a product or battery, it means that

it should not be disposed of with your general household waste.

Some chemicals contained within electrical/electronic products or

batteries can be harmful to health and the environment. Only dispose

of electrical/electronic/battery items in separate collection schemes,

which cater for the recovery and recycling of materials contained within.

Your co-operation is vital to ensure the success of these schemes and

for the protection of the environment

Indoor-part Dimension: 136×75×18mm

Outdoor-part Dimension: 30×30×7mm

Door hole range: 12mm~28mm

Door thickness range: 35mm~105mm

Battery: 3x AA batteries (Not included）

Battery life: 3 months (based on 10 operations per day)

Voltage: 4.5V~3.5V

Notes

We recommend that good quality, branded, alkaline batteries

are used.

Do not leave the product on uneven or unstable surfaces to prevent

damage caused by falling.

Try to avoid placing the product on high-temperature surfaces,

high humidity or a lot of dust, salt spray and other harsh environments

as this may reduce the lifespan of the product.

Take care with the ribbon cable on the door viewer to avoid damage.

In more detail...

Installation

Either remove your current door viewer or drill a new hole at least

13mm diameter up to 20mm diameter Into your door in a suitable

position to view the visitor.

N.B. Always test the product before installation.

Insert your selected screws (B) according to your door thickness

into the Outdoor camera (C) but do not fully tighten.

Push the door viewer (C) into position making sure the ribbon

cable is pushed through rst and the up arrow on the back of the

camera is facing up.

Open the battery cover of the indoor monitor (A) and insert the Micro

SD card.

Then insert 3x AA batteries making sure they are inserted correctly.

N.B. Please install the Micro-SD card before inserting the

batteries.

Taking extra care with the ribbon cable gently push the indoor monitor

(A) back onto the steel bracket (D) and slide down to lock into position.

Connect the ribbon cable by pushing it onto the connection, you

will feel a “Click” as it locks onto the circuit board. Make sure the

cable is tted the correct way around as shown in the image.

Using the steel bracket (D), make sure the up arrow is facing up

and push the ribbon Cable through the slot. Then allow the

screws to push through the holes so the steel bracket becomes

ush with the door.

Tighten the screws to fix the steel bracket and Outdoor camera

into position.

Clip the battery cover back on, the ribbon cable will t in a small

opening allowing it to come through the cover.

Produktspecifikationer