Nedis WCPD20W102WT Bruksanvisning

Läs gratis den bruksanvisning för Nedis WCPD20W102WT (14 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 5 recensioner. Har du en fråga om Nedis WCPD20W102WT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

a

Quick start guide

USB-C Wall Charger

WCPD20W102BK /

WCPD20W102WT

For more information see the extended manual online:

ned.is/wcpd20w102bk | ned.is/wcpd20w102wt

Intended use

The USB wall charger is intended to charge tablets, smartphones

and many other USB devices, without requiring a PC or notebook.

The USB charger converts voltages from 100 to 240 VAC into 5.0

VDC - 12.0 VDC and is very convenient at offices, at home or during

travels.

The product is intended for indoor use only.

The product is not intended for professional use.

Any modification of the product may have consequences for safety,

warranty and proper functioning.

Specications

ProductUSB-C Wall Charger

Article numberWCPD20W102BK / WCPD20W102WT

Input voltage100 - 240 VAC

Input AC frequency50/60 Hz / 0.5 A

Output voltage5.0 VDC / 9.0 VDC / 12.0 VDC

Output current3.0 A / 2.22 A / 1.67 A

Output power15 W / 20 W / 20 W

Average active eciency84.68 %

Eciency at low load (10 %)79.18 %

No-load power consumption0.052 W

Main parts (image A)

1USB charging port

Safety instructions

-

WARNING

• Ensure you have fully read and understood the instructions in this

document before you install or use the product. Keep the

packaging and this document for future reference.

• Only use the product as described in this document.

• Do not use the product if a part is damaged or defective. Replace a

damaged or defective product immediately.

• Do not drop the product and avoid bumping.

• This product may only be serviced by a qualified technician for

maintenance to reduce the risk of electric shock.

• Do not expose the product to water or moisture.

• Disconnect the product from the power source and other

equipment if problems occur.

• Always check that the voltage of the product corresponds to the

mains voltage.

• Do not unplug the product by pulling on the cable. Always grasp

the plug and pull.

• Unplug the product when your device is charged or if you do not

plan on using the product for an extended period of time.

• The power outlet shall be located near the product and shall be

easily accessible.

• Never use a damaged or faulty USB cable for charging. This this

can damage the product and harm your device.

• Stop the charging process if the product gets too warm.

Using the product

1. Connect the charger into the power outlet.

2. Insert a USB cable into the USB charging port and the other end

to the device you want to charge.

3. Unplug the charger when it is not in use.

c

Kurzanleitung

USB-C Wandladegerät

WCPD20W102BK /

WCPD20W102WT

Weitere Informationen finden Sie in

der erweiterten Anleitung online:

ned.is/wcpd20w102bk | ned.is/wcpd20w102wt

Bestimmungsgemäße Verwendung

Das USB-Wandladegerät ist zum Aufladen von Tablets, Smartphones

und vielen anderen USB-Geräten gedacht, ohne dass ein PC oder

Notebook erforderlich ist. Das USB-Ladegerät wandelt Spannungen

von 100 bis 240V in 5,0 VDC - 12,0 VDC um und ist sehr praktisch in

Büros, zu Hause oder auf Reisen.

Das Produkt ist nur zur Verwendung innerhalb von Gebäuden

gedacht.

Das Produkt ist nicht für den professionellen Einsatz gedacht.

Jegliche Modifikation des Produkts kann Folgen für die Sicherheit,

Garantie und ordnungsgemäße Funktionalität haben.

Spezikationen

ProduktUSB-C Wandladegerät

ArtikelnummerWCPD20W102BK / WCPD20W102WT

Eingangsspannung100 - 240 VAC

Eingangs-AC-Frequenz50/60 Hz / 0,5 A

Ausgangsspannung5,0 VDC / 9,0 VDC / 12,0 VDC

Ausgangsstrom3,0 A / 2,22 A / 1,67 A

Ausgangsleistung15 W / 20 W / 20 W

Produktspecifikationer