Netgear FA510 Bruksanvisning
Netgear
Inte kategoriserad
FA510
Läs gratis den bruksanvisning för Netgear FA510 (15 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 2.5 recensioner. Har du en fråga om Netgear FA510 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/15
Model FA510 Network Card Installation Guide
Instructions in this guide are for users of Windows® who are installing the
Model FA510 Network Card. For instructions on installing and verifying the
Windows network driver, refer to “Install the Windows Network Driver” on the
other side of this guide.
These four easy steps provide information for installing your Model FA510
Network Card:
1. Verify Package Contents
2. Install the Network Card
3. Connect the Network Cables
4. Install the Network Driver
As a last step, be sure to fill out and send in your warranty card.
To register online, direct your Web browser to the Web page at:
http://www.netgear.com
Unpack the contents of the package and make sure that you have everything.
Verify PC Requirements
The instructions given in this guide are for using the NETGEAR™ Model
FA510 Network Card in a PC that has a Microsoft® Windows operating system.
Start Here
Verify Package Contents
Model FA510
Network Card
Category 5 10/100 Mbps
UTP cable (provided with
Model FA510C Network
Card)
Installation
guide, Warranty &
Owner Registration Card,
and Support Information Card
Drivers and
Diagnostics Disk
RJ-45 adapter cable
9034FA
Model FA510 Network Card Installation Guide
The Model FA510 Network Card is hot swappable, which means it can be
inserted into a PC that is either turned off or powered on.
1. Insert the Model FA510 Network Card into the CardBus slot as
illustrated in the figure.
Some PCs have two CardBus slots. The Model FA510 Network Card can
be inserted into either slot.
2. Insert the RJ-45 adapter cable into the connector on the edge of the
network card.
3. Insert the Category 5 10/100 Mbps UTP cable into the RJ-45 adapter
cable.
4. If you have chosen to install the card with the power turned o, turn on
the power to the PC.
Install the Network Card
Model FA510
Network Card and
RJ-45 adapter
cable
9025FA
Produktspecifikationer
| Varumärke: | Netgear |
| Kategori: | Inte kategoriserad |
| Modell: | FA510 |
Behöver du hjälp?
Om du behöver hjälp med Netgear FA510 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Netgear Manualer
27 Mars 2025
14 Februari 2025
25 Januari 2025
24 December 2024
14 Oktober 2024
13 Oktober 2024
6 Oktober 2024
4 Oktober 2024
2 Oktober 2024
1 Oktober 2024
Inte kategoriserad Manualer
- Globalo
- Chandler
- Procare
- Fredenstein
- Navman
- Thermarest
- Smart-AVI
- MPM
- VintageView
- KKT Kolbe
- ISDT
- Lexivon
- BMB
- Elite Force
- Vacmaster
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025