Netgear GS728TXUPv3 Bruksanvisning
Netgear
ej kategoriserat
GS728TXUPv3
Läs nedan 📖 manual på svenska för Netgear GS728TXUPv3 (11 sidor) i kategorin ej kategoriserat. Denna guide var användbar för 3 personer och betygsatt med 4.6 stjärnor i genomsnitt av 2 användare
Sida 1/11
Installation Guide
24-Port or 48-Port Gigabit Ethernet
(Ultra60 PoE++) Smart Switch with 4
10G SFP+ Ports
GS728TXv3, GS752TXv3,
GS728TXUPv3, GS752TXUPv3
10G
10G
U
Step 1. Connect the switch
Sample connections
Package contents
• NETGEAR switch
• Detachable power cord (varies by region)
• Rubber footpads for tabletop installation
• Rack-mount kit for rack installation
• Installation guide
NOTE: For information about installation, see the hardware installation guide,
which you can download by visiting www.netgear.com/support/.
GS728TXUPv3 switch
PoE+/PoE++ access points
Network router
PoE+ conference phone
Internet
PoE+
Internet
Network server
Insight Cloud
WiFi clients
WiFi clients with
Insight access
1. Connect devices to the RJ-45 ports (depending on the model, 1–24 or 1–48)
on the switch front panel.
Use Category 5e (Cat 5e) Ethernet cables terminated with RJ-45 connectors
to make Gigabit Ethernet connections.
2. Connect one port on the switch to a network that includes a DHCP server
such as a router.
To use an SFP+ port, which can support a speed of 10G, you must insert an
SFP or SFP+ transceiver module, which you can purchase from NETGEAR.
On models GS728TXv3 and GS728TXUPv3, only ports 25 and 27 support
10G copper modules;
On models GS752TXv3 and GS752TXUPv3, only ports 49 and 51 support
10G copper modules.
CAUTION: If you insert a 10G copper module in an upper SFP+ port, do
not insert any module in the SFP+ port just below it. If you insert 10G copper
modules in the two upper SFP+ ports, do not insert any modules in the two
lower SFP+ ports.
3. Power on the switch and wait two minutes.
If you connected the switch to a network with a DHCP server, the switch is
automatically assigned a new IP address.
(The default switch IP address is 192.168.0.239.)
This switch is designed for indoor use only. If you want to connect it to a
device located outdoors, the outdoor device must be properly grounded
and surge protected, and you must install an Ethernet surge protector inline
between the switch and each outdoor device. Failure to do so can damage the
switch.
WARNING: Before connecting this switch to outdoor cables or
devices, see kb.netgear.com/000057103/ for safety and warranty
information.
Produktspecifikationer
| Varumärke: | Netgear |
| Kategori: | ej kategoriserat |
| Modell: | GS728TXUPv3 |
Behöver du hjälp?
Om du behöver hjälp med Netgear GS728TXUPv3 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Netgear Manualer
11 Juni 2025
ej kategoriserat Manualer
- ej kategoriserat Graphite
- ej kategoriserat Akg
- ej kategoriserat Ermenrich
- ej kategoriserat Olimpia Splendid
- ej kategoriserat Celly
- ej kategoriserat Yamaha
- ej kategoriserat Dremel
- ej kategoriserat Sabrent
- ej kategoriserat EXSYS
- ej kategoriserat AMX
- ej kategoriserat AEG
- ej kategoriserat Schneider
- ej kategoriserat Levenhuk
- ej kategoriserat Hager
- ej kategoriserat Clarion
Nyaste ej kategoriserat Manualer
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025