Netis WF2416 Bruksanvisning

Läs gratis den bruksanvisning för Netis WF2416 (1 sidor) i kategorin Router. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 4 recensioner. Har du en fråga om Netis WF2416 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

WISP Mode :

Select target network and Connection Type.

1. Click “AP Scan” button to select your target network and click “Connect”

button.

2. Type in the wireless security info of the target network.

3. Select connection type. (Please refer to “Internet Settings” AP Router à ”

Mode”)

1.Package Contents

WF2416Ethernet Cable

2.Hardware Information

150Mbps Wireless N Portable Router Quick Installation Guide

netis 150Mbps Wireless N Portable Router

Quick Installation Guide

Quick Installation Guide

150Mbps Wireless N Portable Router Quick Installation Guide 150Mbps Wireless N Portable Router Quick Installation Guide

150Mbps Wireless N Portable Router Quick Installation Guide 150Mbps Wireless N Portable Router Quick Installation Guide 150Mbps Wireless N Portable Router Quick Installation Guide

LAN /WAN

Extender Router

WPSDef ault

LED Status Indication

Solid on System is running.

Flashing Data is transmitting. Or WPS is pairing with

remote device.

Off Power is off.

Hardware Description

Extender Router switch This switch is for changing the operation mode of

WF2416.

LAN/WAN port It is LAN port in AP, WISP, Wi-Fi Extender mode, while

it is WAN port in AP Router mode.

WPS button WPS is for quick wireless security setup and also for

extending existing wireless range with one click.

Default button This button is for resetting the router to factory

defaults.

Modem

WF2416

3.Typical Applications

(1)AP Router Mode(Default mode)

The WF2416 can be connected to a DSL or cable modem and works

as a regular wireless router.

(2)AP Mode

The WF2416 is connected to a network by wired and transforms

the wired network into wireless so that multiple wireless devices

can share the network.

Router

WF2416

(3)WISP Mode

The WF2416 is connected wirelessly to an ISP's Wi-Fi Station, acting

as a gateway and sharing the Internet access to multiple devices.

(4)Wi-Fi Extender Mode

The WF2416 copies and boosts the root wireless signal to extend the

coverage of the signal.

WISP signal

WF2416

Root Router

WF2416

150Mbps Wireless N Portable Router Quick Installation Guide

4.Router Configurations

Step 1 Connecting your computer to WF2416 wirelessly.

Please click on the “ icon (for Windows) Wireless Network Connection”

or “Airport/Wi-Fi” icon (for MAC OS) on the task bar/menu bar.

Double click on and click on button, then type in “netis” “Connect”

“password” as the wireless security key.

Windows OS

(Charged)

AirPort: On

Turn AirPort Off

netis

Other...

Create Network...

Use Interference Robustness

Open Internet Connect...

Mac OS

Wired Network

Auto etho

Disconnect

Wireless Networks

disconnected

netis

More networks...

VPN Connections

Connect to Hidden Wireless Network...

Create New Wireless Network...

Available

Linux

Step 2 Login to the router.

Open a web browser and type in http://192.168.100.1 .

http://192.168.100.1

Step 3 Configure the router.

Select the Operation Mode you need from the pull-down menu.

Internet Connection

Operation Mode:

AP

WISP

AP Router

Note: The configuration includes and , “Internet settings”“Wireless settings”

if you choose , please go to Wireless Settings directly.“AP”

●Internet settings

AP Router Mode :

Select the correct Connection Type.

PPPoESelect “PPPoE” when ：

1. WF2416 is connected to a DSL pure modem.

2. Got username & password from ISP.

3. Broadband connection is needed on PC when bypassing

WF2416.

Type in the Username

& Password provided

by the ISP.

DHCP Select “DHCP” when:

1. WF2416 is connected to a cable modem/DSL modem

router.

2. Internet works directly on PC when bypassing WF2416.

(Dynamic IP)

Static IPSelect “Static IP” when:

1. Got IP Address, Subnet Mask, Default Gateway,

DNS Server from ISP.

Type in all the IP Info.

●Wireless settings

Setup a wireless network name in box, it is recommended to use “SSID”

WPA-PSK/WPA2-PSK for and set a wireless network key in the “Security”

“Password” “Save” box, then click button.

Note: The DHCP Server will be disabled after switching to mode successfully, so you “AP”

will have to set a static IP address for your PC first if you need to login to the web-based

management page again. Please refer to for how to setup a static IP for PC.“Tip 1”

Step 4 Connect your wireless devices to WF2416 to get Internet Access.

For example, on Windows 7, click on the Wireless Network Connection icon

and select the name you set for WF2416 and type in the password you created.

Inte rnet

DHCPdynamicStatic IPPPPoE()

Ope ratio n Mode:WISP

SSID:

Security

Encryption Type:

Key Mode:

Key:

Key Renewal:

netis

WPA-PSK

TKIP AES

ⅡHEX ASC

(pl ease en ter any 8-63 cha rct er s ASCc harct ers A Za z09 (Ⅱ -,-,-))

sec onds 6086 400( -)

APScan

Internet Connection

86400

Wiress Setup

SSID:

Password

Wiress

Save

netis

None WP-PSK/WPA2-PSKA

Password:

Security:

(pl eas e en ter any 8-63 cha rcter s A S Cchar ctersAZ az 09 (Ⅱ -,-,-))

5.Extender Configurations

Note:Please make sure that the WPS feature is Enabled on your main router. If the main router

is unsecured, router's WPS feature will generate a random SSID & Password automatically.

For this case, please contact the technician of your main router for help.

Step 1 Plug in the WF2416.

Step 2 Press the “WPS”button on your existing router. Please refer to the

instructions of the existing router for detailed way to use the WPS button.

Step 3 Press the “WPS”button on WF2416 for 1s and wait for 1 minute

and check if the signal strength of your wireless network got boosted or not.

Note: If you need to do advanced settings, please refer to “Tip 1” to set a static IP for your PC first and

refer to “Router Configurations”>“Step1 & Step2” to login to the web-based management page.

Tip 1 : Setup a Static IP for PC

Manually set the IP address of the wired network adapter on your

computer as below.

IP Address/ IPv4 Address: 192.168.100.x (1<x<255)

Subnet Mask: 255.255.255.0

Default Gateway/ Router:192.168.100.1

For Windows 8/ 7/Vista

1)Go to (for Windows 8)/ (for Windows 7/Vista) > "Settings” “Start”

"Control Panel".

2)Left-click on > “Network and Internet”“Network and Sharing Center”

> (for Windows 8/ 7)/“Change adapter settings””Manage network

connections” (for Windows Vista).

3)Right-click on and left-click on. “Local Area Connection”“Properties”

4)Double-click on. “Internet Protocol Version 4 (TCP/IPv4)”

5)Selectthen left-click on. "Use the following IP address" “OK”

For Windows XP/2000

1)Go to >. "Start" "Control Panel"

2)Left-click on >“Network and Internet Connections”“Network

Connections”.

3)Right-click onand left-click on. “Local Area Connection” “Properties”

4)Double-click on. “Internet Protocol (TCP/IP)”

5)Select then left-click on."Use the following IP address" “OK”

For MAC OS

1)Click on the menu > . "Apple" "System Preferences"

2)Click on the icon. “Network”

3)Click on in the left side box and click on in the “Ethernet” “Advanced”

lower right corner.

4)In the top options, select .“TCP/IP”

5)In the pull-down menu next to select . “Configure IPv4″ “Manually”

6)Fill in the parameters, and click “IPv4 Address/Subnet Mask/Router”

“OK” “Apply” then .

150Mbps Wireless N Portable Router Quick Installation Guide

Troubleshooting

Q: How do I restore my netis WF2416 to default settings?

A With the router powered on, holding button for 8s~10s “Default”

with a pin to restore it to factory defaults.

Q: What can I do if fails to extend the wireless range by “WPS”button?

A:

1) Refer to “Tip1”to set a Static IP address for your PC and connect the

WF2416 to your PC.

2) Open a web browser and login to http://192.168.100.1

3) Click “AP Scan” button to select the existing router and click

“Connect” button. Type in the wireless security info of the existing

router.

4) Under“Wireless Setup”, you may setup a wireless network name in

“SSID” box, it is recommended to use WPA-PSK/WPA2-PSK for

“Security” and set a wireless network key in the box, “Password”

then click button.“Save”

Inte rnet Repreater SSID:

Security

Encryption Type:

Key Mode:

Key:

Key Renewal:

WPA2-PSK

TKIP AES

ⅡHEX ASC

(pl ease en ter any 8-6 3 ch arcte rs ASCch arcte rsAZ az 09 (Ⅱ -,-,-))

seco nds6 08 64 00( -)

APScan

WIFI Extender Settings

86400

Wiress Setup

SSID:

Pas sword

Wiress

Save

net is

None WP-PSK/WPA2- PSKA

Password:

Security:

(pl ease enter any 8-63 ch arct ers ASCcharcte rs AZaz09 (Ⅱ -,-,-))

PKUM05176

Appendix : FCC Statement

Technical Support:

USA/ Canada

Toll Free: +1 866 71 network (+1 866 716 3896)

E-mail: usa_support@netis-systems.com

Other Regions:

E-mail: support@netis-systems.com

1 234

5 6 7 8

netis 150Mbps Wireless N Portable Router

Quick I nstal lation Gui de

Note: Different power plug is provided for different region. Here we take US

version for example.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled

environment and it also complies with Part 15 of the FCC RF Rules. This transmitter

must not be co-located or operating in conjunction with any other antenna or

transmitter.

This equipment should be installed and operated with a minimum distance of

20 centimeters between the radiator and your body.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Caution!

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Model No. WF2416

Produktspecifikationer