NGM WeMove Discovery Bruksanvisning

NGM Mobiltelefon WeMove Discovery

Läs gratis den bruksanvisning för NGM WeMove Discovery (21 sidor) i kategorin Mobiltelefon. Guiden har ansetts hjälpsam av 31 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 16 recensioner. Har du en fråga om NGM WeMove Discovery eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/21
Set up
Installing the USIM cards
The USIM card stores information as your personal phone
number, PIN code, carrier services numbers, contacts and other
important details. To access the USIM slots, turn off the phone,
slide off the back cover and extract the battery. The USIM cards
must be inserted into their slots with the gold contacts facing
downwards, follow the scheme. Slot SIM1 supports UMTS
USIM.
Installing the memory card
In order to use all functions of NGM WEMOVE DISCOVERY, it is
advisable to install a micro-SD card: it must be inserted in the
back side of the phone, after powering it off and removing the
battery. A dedicated slot fort the memory card is placed near
the SIM-slots. Slide in the memory card with the gold contacts
facing downwards.
MicroSD
Inserting the battery
Your device is provided with a lithium-ion battery and is
designed to be used exclusively with original NGM batteries and
chargers. The battery must be inserted into the backside of the
phone (see illustration below). Align the battery contacts with
the phone connector inside the battery tray, and let it slide
down in position. When done, put the hind cover of the phone
back and make slight pressures along the cover rim.
Charging the battery
Please charge the battery completely before starting to use the
device. Use the provided USB cable, connecting one end to the
provided wall socket adaptor (placed into a socket) and the
other end to the USB connector placed on the left side of the
phone. The phone can also be charged by connecting it to a PC
USB port but in that case it will charge more slowly. While the
battery is charging, an animation on screen will show the
charging progress if the phone is on. Once charge is completed,
the icon will be filled and the phone can be disconnected from
the grid. With the phone turned off, a red led will indicate the
charging process and will turn green when the battery is full.
Warning: Do not connect the phone to a booting-up or running
down PC to avoid voltage jumps. In order to preserve the correct
functioning of the device and in order not to compromise
warranty, the sole use of original NGM battery chargers and
accessories are recommended. Please charge the battery
indoors, in a dry and favorable environment. It’s normal for the
battery to get slightly warm during the charging process. The
battery will reach the full capacity when cycled several times.
Volume +/-
Cover removal slit
Micro USB
Earphone jack
On/Off and standby key
Capacitive
touch screen
Front camera
Proximity sensor
Brightness sensor
Receiver
Signalling led
Camera
Speaker
Microphone
Home
Contextual menu
Back
Search


Produktspecifikationer

Varumärke: NGM
Kategori: Mobiltelefon
Modell: WeMove Discovery

Behöver du hjälp?

Om du behöver hjälp med NGM WeMove Discovery ställ en fråga nedan och andra användare kommer att svara dig