NUVO Bento 60/4084 Bruksanvisning

NUVO Lättnad Bento 60/4084

Läs gratis den bruksanvisning för NUVO Bento 60/4084 (2 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 27 personer och har ett genomsnittsbetyg på 3.9 stjärnor baserat på 14 recensioner. Har du en fråga om NUVO Bento 60/4084 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
ASSEMBLY INSTRUCTION
SKU#60/4 3, 60/ 08 4084
NOTE: Please consult a qualied electrician if you are not certain of the installation or service.
CAUTION: Before starting the installation or servi , disconnect the power by turning o the circuit ce
breaker or by removing the fuse at the fuse box.
1. Carefully unpack the xture, lay out all parts on a clean surface.
2. Fasten the mounting ring onto the outlet box by using provided 2 outlet box screws.
3. Tie ground wire from outlet box and from xture to the ground screw on the mounting ring. Connect white
wire (live wire) from supply circuit. Cover connections using provided wire connectors.
4. Place the xture body to the wall by aligning the protruding mounting screws all the way through the wall
plate and tighten lock nuts to the mounting screws until the xture body is held rmly against the wall.
5. Unscrew the socket rings and socket covers from the sockets. Place the shades and socket covers over the
sockets, refasten the socket rings to secure them.
6. Install the bulbs ot included). (N
7. Turn on the power. This xture can be installed as an up-light or down-light position. a
A Satco Product


Produktspecifikationer

Varumärke: NUVO
Kategori: Lättnad
Modell: Bento 60/4084

Behöver du hjälp?

Om du behöver hjälp med NUVO Bento 60/4084 ställ en fråga nedan och andra användare kommer att svara dig