Olivetti ECR 5500 Bruksanvisning
Läs gratis den bruksanvisning för Olivetti ECR 5500 (39 sidor) i kategorin Låda. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 10.5 recensioner. Har du en fråga om Olivetti ECR 5500 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/39
ECR 5500
Cash Register
QUICK REFERENCE GUIDE
GUIDE DE REFERENCE
KURZANLEITUNG
GUÍA DE REFERENCIA RÁPIDA
BEKNOPTE HANDLEIDING
GUIA PRATICO DE REFERIMENTO
NEDERLANDS FRANÇAISDEUTSCHESPAÑOLPORTUGUÊS ENGLISH
PUBLICATION ISSUED BY:
Olivetti Tecnost, S.p.A.
77, Via Jervis - 10015 Ivrea (To)
Italy
Copyright
©
2003, Olivetti
All rights reserved
1
ENGLISH
Quick Reference Guide
QUICK START
Unpack the cash register and place it on a level, stable, vibration-free and dust-free surface near a grounded
power outlet.
Plug the cash register into the power outlet and then insert three charged "AA" size memory backup batteries in the
battery compartment as explained in the section Inserting/Replacing Batteries of the Instructions Manual. During
cash register operation, all transaction data for the management report are stored in the register's memory. This
memory also holds all optional programming information. The memory back-up battery system keeps this
information stored in memory when the cash register is turned off or when a power failure occurs. All data stored
in memory will be canceled if you unplug the cash register from the electrical wall outlet without back-up
battery supply.
Load the standard roll of thermal paper tape as explained in the related section of the Instructions Manual.
1. SET THE DATE
1. Open the printer compartment cover and slide the control switch to the PRG position.
2. Type the [numeric keys] representing the current date. Use the DDMMYY format. Single digit numbers for
months and days must be preceded by a zero (0).
3. Press the [#/NS] key to store the date.
4. Program another feature or exit the program mode by sliding the control switch to the OFF position.
Example: Set a date of September 29, 2003.
Type/Press:
[290903] + [#/NS]
NOTE: If you wish that the date just entered be printed in the month/day/year format, type [70] and then press
the [RA/FC] key.
2. SET THE TIME
1. Open the printer compartment cover and slide the control switch to the PRG position.
2. Type the [current time] using the HH:MM format. Time is set according to international, or military time (24-
hour clock format). To correctly enter this time, simply add 12 to all hours in the PM. For example, to set the
time to 9:00 AM, type [0900]; to set the time to 2:15 PM, type [1415].
3. Press the [Qty/Time] key to store the entered time.
4. Program another feature or exit the program mode by sliding the control switch to the OFF position.
Example: Set the time at 3:30 PM.
Type/Press:
[1530] + [Qty/Time]
NOTE: If you wish that the time just entered be printed and displayed in the 24-hour format, type [40] and then press
the [RA/FC] key.
Produktspecifikationer
| Varumärke: | Olivetti |
| Kategori: | Låda |
| Modell: | ECR 5500 |
Behöver du hjälp?
Om du behöver hjälp med Olivetti ECR 5500 ställ en fråga nedan och andra användare kommer att svara dig
Låda Olivetti Manualer
10 September 2024
9 September 2024
9 September 2024
9 September 2024
9 September 2024
8 September 2024
8 September 2024
7 September 2024
7 September 2024
7 September 2024
Låda Manualer
- VeriFone
- Custom
- Sharp
- Vectron
- Barska
- HP
- MyPOS
- AOpen
- Miele
- Royal Sovereign
- Olympia
- Newland
- SAM4s
- Flytech
- EC Line
Nyaste Låda Manualer
20 Februari 2025
20 Februari 2025
20 Februari 2025
4 Januari 2025
1 Januari 2025
29 December 2024
29 December 2024
29 December 2024
29 December 2024
28 December 2024