Omega PL403A Bruksanvisning

Omega Diskmaskin PL403A

Läs gratis den bruksanvisning för Omega PL403A (26 sidor) i kategorin Diskmaskin. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 1.5 recensioner. Har du en fråga om Omega PL403A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/26
PL403A
14 place settings
half-load function
With each wash cycle.
Compartment
For programmes with pre-w ash only.
(Follow the use r instr uctions! )
Electric indicator on control panel (if provided).
Check the rinse aid level
Load the b askets
Select a programme
Runnin g the dishwasher
Fill the detergent dispenser
Scrape off any large a mount of leftover food . Soften remnants of burnt food in pans,
then loa d the baskets. Refer to the dishwasher loading instructions.
Switch on the appliance
For detailed operating method read the corresponding content on the instruction manual.
Switch off the appliance
Turn off the water tap,
unload th e baskets
Warning: wait a few m inutes (about 15 minutes) before unloading the dishwasher to avoid ha ndling
the dishes and utensils while they are still hot a nd more susceptible to brea k.
They will also dry better.Unload the appliance, starting from t he lower basket.
Changing the programme
Add forgotten dishes in the
dishwasher.
When the wo rking c ycle has finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the applianc e using the On/Off Button.
If the appliance is switched
o ff during a wash cycle.
O pen th e doo r carefully.
H ot steam may esca pe
w hen th e door is ope ned!
If the appliance is switched off during a wash cycl e, when swi tched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ..
1. A running cycle can only be modified if it has been running fo r a short time. Otherwise the deter gent
may have already been released and the water already drained. If this is the case, the deter gent
di spenser mus t be refilled.
2. Press the On/Off button to stop washing , Then press this button to reset .
3. Turn the selector to select a new programme.
4. Restart the dishwasher.
1.Press the Start/Pause Button to stop the washin g.
2.Open the door a little .
3.After the spray arms stop working, you can open the door
co mpletely.
4.Add forgotten dishes.
5.Close the door
6.Press the Start/Paus e Butto n, the dishwasher w ill run
after 10 seconds.
Turn on the w ater tap and press the Start /Pause Button. The machine will start working
after ab out 10 seconds.
Close the door,turn the Wash ing Program Selector to select a desired programme.
( See the section entitled Operating instruction )“”
Press the On/Off button to switch o n the appliance, Open the door.
A
B
C

Produktspecifikationer

Varumärke: Omega
Kategori: Diskmaskin
Modell: PL403A

Behöver du hjälp?

Om du behöver hjälp med Omega PL403A ställ en fråga nedan och andra användare kommer att svara dig