Omnitronic PA Volume Controller Bruksanvisning

Läs gratis den bruksanvisning för Omnitronic PA Volume Controller (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 26 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 9 recensioner. Har du en fråga om Omnitronic PA Volume Controller eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

PA Volume Controller

Safety Instructions

with 24 VEmergencyPriority Relay

The volumecontroller was designedfor usein 100V PAsystems. Itoffers elevenswitching positionsand

is equippedwith an emergencypriority relay. The maximumnominal loadby the followingspeakersor by

the following speaker group must not be exceeded. The volume controller must be installed into a

customaryflush socket or intoan optional surface socket.

Audio transformerfor 100 V line technique

Attenuation in 11steps

Flush mounting in customary 60mm wall sockets

Surface mounting withoptional PASF housing

Mounting depth:45 mm

Screw plug connection

Multiplepowerratings andcolors available

Before yourinitial start-up,please make sure thatthere are notransport damages. Shouldthere be

any,donot takethe deviceinto operationand immediately consultyour dealer.

Operate the device onlyafterhaving familiarized withitsfunctions.Do not permitoperation by

persons notqualifiedforoperatingthe device.

Thisproductwasdesignedforindoor useonly. Protectthe deviceagainst humidityandheat. The

ambient temperature must always be between 0° C and 40° C. Keep away from heatersand other

heating sources!

Speaker cablesare sensitiveto electricalinterference. Hence, itisrecommendedto lay themat a

distance ofseveral metersto sourcesofinterference(e.g. dimmers, light switches).

Maintenance and serviceoperations are only to be carried out by authorizeddealers. Damage,

caused by manual modificationson the device are notsubject to warranty. If the device isused for

other purposesthanoriginally intended orifit isnot correctly connected,the product may suffer

damagesand theguarantee becomesvoid.

For cleaning,please useasoft lint-free andmoistened cloth.Never usealcoholor solvents!

www.omnitronic.com

00033856.DOC, Version 1.0

© Copyright

Nachdruck verboten!

Reproduction prohibited!

100 V PA TECHNIQUE

USER'S MANUAL

PA Volume Controller

PAVolume Controller

Please note: Every information is subject tochange withoutpriornotice. 01.02.2008©

Electrical Connection

Technical Specifications

DANGER TOLIFE!

High voltage atterminals. Installation byskilled personnel only!

Cablinga PAsystemis anelectric installationwhich mustonly becarried outby aqualified

electrician!Always insulate the connection cables whicharenot used. Pay attention tothe correct

powermatching. Overloadwill result indamage ofthe PAamplifierand ofthe volumecontroller.

If thePAsystem isturned on,turnitoffbeforemaking anyconnection.

To facilitate handling, the terminalscan be removed from their plug-in connections onthe unit

and replacedafter connection.

Connectthe linesofthe 100V signalsource tothe positiveand negativepole ofthe input“IN”.

Connectthe PAspeakerto thepositive and negativepole of the output“OUT”.

The emergencypriority relaycanbe activatedby a24 VDC voltage

positive and negative pole oftheBy activating the

emergency priority relay important announcements canbe heard via the PAspeaker connected

even ifthe volumecontrolleris settominimum(leftstop position).

Turn offPA systembefore

connecting.

. Connectthe 24Vcontrol lines

for activating the relay totheterminal “24V”.

80711011.........................30 W

80711012.........................45 W

80711015.........................10 W

80711016.........................45 W

Frequency range:................50-18,000Hz

Priority relay:......................24V DC

Dimensions:.......................80 x 80x 67

Mounting depth: ..................45 mm

Weight:..............................200 g

Rated power:

80711001.........................5 W

80711002.........................10 W

80711003.........................20 W

80711004.........................30 W

80711005.........................45 W

80711008.........................5 W

80711009.........................10 W

80711010.........................20 W

+24V- +OUT-+IN-

24V DC voltageSignal source

PA speaker connections

Produktspecifikationer