Optoma BX-AL133 Bruksanvisning

Optoma Projektor tillbehör BX-AL133

Läs nedan 📖 manual på svenska för Optoma BX-AL133 (19 sidor) i kategorin Projektor tillbehör. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/19

User’s Manual

BX-AL133 Anamorphic Lens

User’s Manual

BX-AL133

For more information, please visit our website at:

http://www.OptomaUSA.com User’s Manual | 2

Safety

1. Read and understand instructions and heed warnings before beginning installation.

2. Mount rail securely. The lens is heavy, and requires a secure and stable surface.

Fasteners in sheetrock alone are not safe. Reciprocal lens motion can and will work

them loose. Use a board, plate, or projector mount ﬁxed to ceiling joists or studs.

3. Anticipate unexpected lens motion. A malfunction can cause the lens to move

unexpectedly. Disconnect the power when installing, working on or repositioning

the lens. While on a ladder, do not stand in the direct path of the lens in case of

unexpected or accidental movement.

4. Do not install the lens in a wet or moist environment, or where the mechanism will be

exposed to extreme or external weather conditions. The lens is for indoor use only.

5. Never pour any liquid or push any object into the enclosure.

6. Do not install in direct path of heater vents or projector exhaust ports. Do not block

any of the vents or holes in the enclosure.

7. The power adaptor is intended for 100- 220 volt, 50-60 cycle AC power only.

8. Do not subject power cord to conditions which will wear through or cut the insulation.

Avoid excessive tension or chaﬁng of the cord.

9. Do not service the motor drive or electronics. There are no user serviceable parts.

Contact your dealer or send to a factory approved facility. Opening the case will void

the warranty.

10. Exercise extreme caution when working on a ladder. Do not work directly above

another person, particularly a child. Plan all work carefully. Accidentally dropping a

drill, hammer, or the lens assembly can cause serious bodily injury.

11. Pushing or forcing the sled by hand may damage the circuit board. Should it be

necessary to move the sled by hand, make sure it is done slowly and lightly.

12. The Optoma motorized sled will ramp up and down at the beginning and end of the

traversal to minimize swaying forces at the mount. As the motor accelerates and

brakes, there is a minimal change in the sound.

This device complies with part 15 of the FCC rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

September 2005 Edition

User’s Manual

BX-AL133

For more information, please visit our website at:

http://www.OptomaUSA.com User’s Manual | 3

Introduction

Thank you for purchasing the Optoma BX-AL133 anamorphic lens. The lens and

motorized sled is outﬁtted with a custom mechanism designed exclusively for use in a

home theater environment.

No oil or liquid based lubricants are used to assure the maximum cleanliness of optical

components. Both lens and drive will provide years of maintenance free service. The

Optoma system is built and tested in the USA with the strictest quality standards and

certiﬁcations.

Features and beneﬁts:

 Easy, straight forward installation and operation

 Machined, high-grade, anodized aluminum components

 Repeatable precision positioning system

 Flexible mounting options for either table top or ceiling mount

 Speed selector for high or low speed operation

 Conﬁgurable “lens in” position

 Extra external IR sensor for remote mounting (if needed)

 Input 12V jack for automatic lens trigger

 Output 12V jack for screen masking trigger

 Non-mechanical long life optical stop sensors

 Dry operating precision linear bearings

 Heavy-duty, high-precision NEMA 23 stepper motor

 Custom built, low noise stepper drive circuitry and ﬁrmware

 Endurance tested to more than 250,000 traversals

 8-button long-range (up to 50 feet) remote control with discrete functions

 Backlit logo with on/off lighting control

 Reversible logo plates

 Built and tested in the USA

 FCC, CE and UL certiﬁed

Produktspecifikationer

Varumärke:	Optoma
Kategori:	Projektor tillbehör
Modell:	BX-AL133
Enhetsplacering:	Ingebouwd
Typ av operation:	Touch
Färg på produkten:	Zwart
Vikt:	10800 g
Bredd:	600 mm
Djup:	600 mm
Höjd:	100 mm
Typ av material (överst):	Keramisch
Antal brännare/kokzoner:	4 zone(s)
Typ av häll:	Inductiekookplaat zones
Sjud brännaren/kokzonens diameter:	160 mm
Vanlig brännare/kokzonsdiameter:	160 mm
Sjud brännare/kokzon:	1400 W
Normal brännare/kokzon:	2000 W
Tillgångar:	7200 W
Stor brännare/kokzonsdiameter:	200 mm
Stor brännare/kokzon:	2300 W
Beeldscherm:	Ja
Pansigenkänning:	Ja