Oricom ANU850 Bruksanvisning

Oricom Radio ANU850

Läs gratis den bruksanvisning för Oricom ANU850 (2 sidor) i kategorin Radio. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 5.5 recensioner. Har du en fråga om Oricom ANU850 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
ANU8 0 UHF CB ANTENNA5
FITTING INSTRUCTIONS
Pack includes
Heavy duty barrel spring base
Fibreglass radome
Low-loss coaxial cable (4.5m)
Pre-terminated FME connector and PL259 adaptor
IMPOR ANTT
raffic Safety Guidelines
Installation
1. Remove the shroud protecting the cable at the base of the antenna.
2. Install the spring base onto the bracket (not supplied). Tigten in a clockwise
direction using a hexagon wrench or spanne . IMPOR AN : Do not exceed 50N.r T T
3. Remove the cap from the top of the spring base and install the fiberglass
extension pole on to the base by turning in a clockwise direction and secure in p cela
with the grub screw (using the hex key provied). Hand tighten only MAX. 15N.


Produktspecifikationer

Varumärke: Oricom
Kategori: Radio
Modell: ANU850

Behöver du hjälp?

Om du behöver hjälp med Oricom ANU850 ställ en fråga nedan och andra användare kommer att svara dig