OSD Audio BOM4.1.2 Bruksanvisning
Läs gratis den bruksanvisning för OSD Audio BOM4.1.2 (1 sidor) i kategorin Subwoofer. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 12 recensioner. Har du en fråga om OSD Audio BOM4.1.2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
B L U E T O O T H
O U T D O O R S U B W O O F E R
BOM4.1.2
Q U I C K S T A R T G U I D E
OSD Audio
Brea, CA
osdaudio.com
CONTENT:
Master Speaker/Subwoofer
Bluetooth Receiver
Internal Power Amplier
110-240V
Water Proof IP67
Rated Power Supply
Power Supply
Master Speaker /
Subwoofer
30 feet max
Optional Stereo Speakers
(OSD LS3 shown not included)
Connect the copper wire lead to (+)
positive and the silver to (-) negative
on the speakers input terminal
Basic Setup of the BOM4.1.2
1.) The master speaker needs to be located near an AC outlet where you can
connect the power supply to the master speaker in order to provide the electrical
current needed for the internal power amplier and bluetooth receiver.
2.) The optional stereo speakers should be placed 8-12 feet apart from one another
and must be connected within 30 feet of the master speaker to ensure maximum
performance.
3.) Connect at least one pair of optional 8 ohm stereo speakers such as the OSD LS3
Landscape Speakers to the BOM4.1.2 master speaker for full range sound and no
more than two pairs (4 speakers) total.
System Diagram
Make sure both your Bluetooth device and the
BOM speaker is turned on.
To pair two Bluetooth enabled devices, both the Bluetooth
device and the speakers must be turned on and fully powered
or fully charged. Bluetooth controls are typically found in the
device’s Setting or Connections menu. The speakers will out-
put a Bluetooth Sync code that will be received by the Bluetooth
device. Settings such as volume, mute, etc., will be controlled
directly from your Bluetooth phone, tablet or other device.
Only one connection at a time:
The speakers will sync with only one device at a time. You
must disconnect the current device before syncing to another.
Master Speaker /
Subwoofer
Optional Stereo Speakers
(not included)
“State of the art” Bluetooth
operation connects to any
Bluetooth enabled device
Sync to Bluetooth enabled
devices like smart phones
and tablets
Bluetooth Range
30-75 feet line of sight
Range may vary:
Distances, both unobstructed
and obstructed, may dier
depending on the device you
are syncing up to the BOM4.1.2
Produktspecifikationer
| Varumärke: | OSD Audio |
| Kategori: | Subwoofer |
| Modell: | BOM4.1.2 |
Behöver du hjälp?
Om du behöver hjälp med OSD Audio BOM4.1.2 ställ en fråga nedan och andra användare kommer att svara dig
Subwoofer OSD Audio Manualer
9 September 2025
9 September 2025
9 September 2025
9 September 2025
19 Juni 2025
28 Januari 2025
28 Januari 2025
6 Januari 2025
5 Januari 2025
26 September 2024
Subwoofer Manualer
- On-Q
- Q Acoustics
- Dynacord
- Philips
- Roswell
- PowerBass
- Rockustics
- QSC
- QTX
- Toa
- Alphasonik
- Triangle
- FBT
- MB Quart
- Behringer
Nyaste Subwoofer Manualer
21 Oktober 2025
18 Oktober 2025
18 Oktober 2025
15 Oktober 2025
15 Oktober 2025
15 Oktober 2025
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025