Owon DGE3000 Bruksanvisning
Owon
Mätutrustning
DGE3000
Läs gratis den bruksanvisning för Owon DGE3000 (42 sidor) i kategorin Mätutrustning. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 10.5 recensioner. Har du en fråga om Owon DGE3000 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/42
DGE3000 Series Dual-Channel
Arbitrary Waveform Generator
User Manual
For product support, visit:www.owon.com.hk/download
※：The illustrations, interface, icons and characters in the user manual may be slightly
different from the actual product. Please refer to the actual product.
Jan 2024 Edition V1.0.2
Copyright © LILLIPUT Company. All rights reserved.
The LILLIPUT's products are under the protection of the patent rights, including ones
which have already obtained the patent rights and those which are applied for. The
information in this manual will replace all materials published.
The information in this manual was correct at the time of printing. However, LILLIPUT will
continue to improve products and reserves the rights to change specification at any time
without notice.
is the registered trademark of the LILLIPUT Company.
Fujian LILLIPUT Optoelectronics Technology Co., Ltd.
No. 19, Heming Road
Lantian Industrial Zone, Zhangzhou 363005 P.R. China
Tel: Fax:+86-596-2130430 +86-596-2109272
Web: www.owon.com info@owon.com.cnE-mail:
General Warranty
We warrant that the product will be free from defects in materials and
workmanship for a period of 3 years from the date of purchase of the product
by the original purchaser from our company. The warranty period for
accessories such as probes, battery is 12 months. This warranty only applies
to the original purchaser and is not transferable to a third party.
If the product proves defective during the warranty period, we will either repair
the defective product without charge for parts and labour, or will provide a
replacement in exchange for the defective product. Parts, modules and
replacement products used by our company for warranty work may be new or
reconditioned like new. All replaced parts, modules and products become the
property of our company.
In order to obtain service under this warranty, the customer must notify our
company of the defect before the expiration of the warranty period. Customer
shall be responsible for packaging and shipping the defective product to the
designated service centre, a copy of the customers proof of purchase is also
required.
This warranty shall not apply to any defect, failure or damage caused by
improper use or improper or inadequate maintenance and care. We shall not
be obligated to furnish service under this warranty a) to repair damage
resulting from attempts by personnel other than our company representatives
to install, repair or service the product; b) to repair damage resulting from
improper use or connection to incompatible equipment; c) to repair any
damage or malfunction caused by the use of not our supplies; or d) to service a
product that has been modified or integrated with other products when the
effect of such modification or integration increases the time or difficulty of
servicing the product.
Please contact the nearest Sales and Service Offices for services.
Excepting the after-sales services provided in this summary or the applicable
warranty statements, we will not offer any guarantee for maintenance definitely
declared or hinted, including but not limited to the implied guarantee for
marketability and special-purpose acceptability. We should not take any
responsibilities for any indirect, special or consequent damages.
Produktspecifikationer
| Varumärke: | Owon |
| Kategori: | Mätutrustning |
| Modell: | DGE3000 |
Behöver du hjälp?
Om du behöver hjälp med Owon DGE3000 ställ en fråga nedan och andra användare kommer att svara dig
Mätutrustning Owon Manualer
25 September 2024
25 September 2024
22 September 2024
22 September 2024
22 September 2024
22 September 2024
22 September 2024
22 September 2024
21 September 2024
21 September 2024
Mätutrustning Manualer
- Vimar
- Dostmann Electronic
- Mitsubishi
- Blebox
- Janitza
- Uni-T
- Qualita
- Hager
- VDO
- Kern
- UHoo
- Beha-Amprobe
- Powerfix
- Continental Edison
- Senseca
Nyaste Mätutrustning Manualer
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025