Oyster Digital CI Bruksanvisning


Läs gratis den bruksanvisning för Oyster Digital CI (36 sidor) i kategorin Satellitmottagare. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 12 recensioner. Har du en fråga om Oyster Digital CI eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/36
Version 1/2008
Installation Instructions
OYSTER DIGITAL CI
Page 2 of 18
FITTING INSTRUCTIONS OYSTER DIGITAL
It is no problem to fit an Oyster Digital fully automatic satellite
system onto any vehicle. However, you should take care with
some specific points and therefore, PLEASE READ these
instructions carefully before starting your work, to obtain the very
best results later on whenever you use your new system.
Please read each topic in this manual carefully, before
performing the work described there. Go through the topics step
by step.
Attention:
Highly sensitive device. Never apply any external force
to the dish bracket or the LNB arm. Any movement of
the dish will happen automatically. Do not lift or rotate
manually. Do not carry the system on the dish, the LNB
or any of the cables. Always hold it on the plastic body
or the aluminium mounting plate. Do not remove any of
the screws on the plastic body.
Page 3 of 18
Shipped items
When unpacking you should find the following:
Plastic bag with:
- 5m Cable from TopBox to Receiver
- 3 – pin power supply strip (RED: +12V, BROWN: GND, Black: Ignition)
- TV coaxial cable
- SCART cable
- Operating instructions
- Fitting instructions (this document)
- 6 screws for the mounting plate
- 4 bolts to fit the dish to its bracket
- 4 screws to fit the aluminium elbow (cable-feed-through)


Produktspecifikationer

Varumärke: Oyster
Kategori: Satellitmottagare
Modell: Digital CI

Behöver du hjälp?

Om du behöver hjälp med Oyster Digital CI ställ en fråga nedan och andra användare kommer att svara dig