Ozito CDL-1810 Bruksanvisning

Ozito Borrmaskin CDL-1810

Läs gratis den bruksanvisning för Ozito CDL-1810 (8 sidor) i kategorin Borrmaskin. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 2 recensioner. Har du en fråga om Ozito CDL-1810 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/8
CORDLESS
DRILL
DRIVER
18V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Chuck Size: 10mm Keyless
No Load Speed: 0-550/min
Torque Setting: 21
Max. Torque: 16Nm
Battery Power: 1.5Ah Lithium Ion
Charge time: 3-5 Hours
Weight: 0.9kg
CDL-1810
WHAT’S IN THE BOX
Cordless Drill Driver
ozito.com.au
18V Battery x 2
Charging Adaptor & Cradle
Belt Clip
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 2 3 4 5
8
6
9
7
10
8 Charging Cradle
9 Charging Adaptor
10 Charging Jack
11 Belt Clip Removing the Battery Pack
1 Hold down the battery release
button.
2 Slide the battery
out.
11
ACCESSORIES
Adjusting Torque
1 Rotate the torque collar to the desired setting.
Removing a Drill Bit
1 Open the chuck by rotating the
chuck collar and remove the
frill bit.
4 Pull on the bit to
ensure it is rmly
secured.
Note: The more the variable speed trigger is depressed, the
faster the drill bit will rotate.
Note: Selecting a higher torque setting will allow the drill to
use more torque to drive the screw in or out. To prevent
damaging the screw head, it is recommended to start at
a low torque setting and increase when necessary.
CAUTION: TO REDUCE THE RISK OF INJURY WE
RECOMMEND THE USE OF GLOVES WHEN HANDLING
DRILL BITS.

Produktspecifikationer

Varumärke: Ozito
Kategori: Borrmaskin
Modell: CDL-1810

Behöver du hjälp?

Om du behöver hjälp med Ozito CDL-1810 ställ en fråga nedan och andra användare kommer att svara dig