Ozito PXCHTK-018 Bruksanvisning

Ozito Häcksax PXCHTK-018

Läs gratis den bruksanvisning för Ozito PXCHTK-018 (7 sidor) i kategorin Häcksax. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2.5 recensioner. Har du en fråga om Ozito PXCHTK-018 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/7
CORDLESS HEDGE
TRIMMER KIT
18V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 18V
Battery: 1.5Ah Li-ion
Charge Time: 2 Hours
Cutting Speed: 2,200 SPM
Max. Cutting Capacity: 11mm
Blade Length: 460mm
Weight: 2.45kg
PXCHTK-018
WHAT’S IN THE BOX
Hedge Trimmer
Blade Cover
ozito.com.au Eco Charger
1.5Ah Battery Pack
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Ensure the safety
guard is tted securely
onto the hedge trimmer
before use. Tighten the
screws on either side if
necessary.
Safety Guard
WARNING! NEVER USE THE HEDGE TRIMMING UNLESS
THE SAFETY GUARD IS FITTED.
9 Battery Release Tab
10 Battery Charge LED’s
11 Battery Charge Indicator
Button
12 Blade Cover
13 Charger
14 Charger LED
ACCESSORIES
9 10 11 12 13 14
4 The charger LED will illuminate red signifying that the battery
is charging.
5 When removing the charger
from the battery, rst press
the battery release tab, then
slide the charger from its
position.
Note: The battery will not develop a memory, it does not have to
be fully discharged before recharging
3 With the battery sitting on a
at surface, align the raised
ribs on the battery with
the recess in the charger
and slide onto the battery
ensuring a rm connection.
Mid state of charge
Full state of charge.
Note: The battery needs to be removed from the tool to check the state
of charge.
Battery protection system
The tool is equipped with the battery protection system, which helps to
ensure a long service life.
The output power automatically cuts off during operation when the tool
and/or battery are placed under the following situations:
When the tool is overloaded:
If this occurs, release the trigger switch and remove causes of
overload, then pull the switch trigger again to restart.
When the remaining battery capacity becomes low:
Recharge the battery pack.
Note: The battery protection system does not in any way damage the
tool.
Note: The indicated capacity may be lower than the actual level during
use or immediately after using the tool.

Produktspecifikationer

Varumärke: Ozito
Kategori: Häcksax
Modell: PXCHTK-018

Behöver du hjälp?

Om du behöver hjälp med Ozito PXCHTK-018 ställ en fråga nedan och andra användare kommer att svara dig