Paasche RG-3AS Bruksanvisning

Läs gratis den bruksanvisning för Paasche RG-3AS (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 8 recensioner. Har du en fråga om Paasche RG-3AS eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

INSTRUCTIONS&PARTSLISTRAPTOR- 9-25-2020

RAPTOR

RAPTOR

RAPTOR

RAPTORRAPTOR

Double Action-Internal Mix- Gravity Feed-

PTFE Packings.

SizeNeedle,Tip,and Aircap Installed# 1.

WARNING:Spray materials may be harmful if inhaled or allow

ed

to come into contact with the skin or eyes. Consult the product

label and Material Safety Data Sheet supplied for the spray

material. Follow all safety precautions. CAUTION:Well Ventilated

Area Required to remove fumes, dust or overspray. Secure airhose

to Airbrush with V-62 Wrench for safety and to prevent air leaks.

M PSax Ai um m i r r se su .r 7e 5 P .I.

*Note: Etch on Items lines

2 32.and 1 size.All should indicate

match when on airbrush.installed

For Multi-Language Manuals go to: www.paascheairbrush.com

1. Attach to to air hose air supply and airbrush. 20-55 If using pressure a regulator set between psi .

2. Press down on Finger Button to air and pull back on button to control quantity of color.release

3. Speed of movement controls color density of and end fading effects at beginning and of strokes.

4. Practice this movement until you can spray a fine line or a broad pattern without heavy build up at thebeginning or end of your

strokes.

5. For detail, the very to the hold airbrush close surface push down for air and pull back very slowly onthe Finger Button to release a

smallamount of paint.

6. For background work and away broad hold effects, the airbrush from the work surface and pull backon Finger Button to release

requiredamount of color.

•Dual Action • Gravity Feed • Internal Mx • Cutaway Handle w/ Pre-set Needle Stop •i • 1/10th gravity cup ounce PTFE Packing

•TT-1 , and TN-1, TA-1 components come the Installed on Raptor.

Options for :Raptor

.2mm head (TT-TN-TA-1finedetail0, 0and components) Great for jobs requiring the "extremely "

.25mm head (TT-1, TN-1, and TA-1 component

.38mm head (TT-2, TN-2 and TA-2) components

.66mm head and TA-3)Great for spraying Metallics, Pearlescent and ThickerPaints(T-3 T,TN-3 components.

Working Pressures:

Operating pressures 15-55 PSI; Maximum pressure 85 PSI. aircap needs 20 PSI more.Fan or

20-30 PSI best for detail spraying w/ properly paintis thinned .

Use the is not higher pressures detail for thicker material where fine critical or thin the paint forlower pressures.

RG Specifications:

NO. PART

1. XI-41

2. *TA-1, TA-2, TA-3* *

3.0 1*TT-, TT-*, TT-2, TT-3* *

4. MIL-12

5. RG-30

6. RG-8

7. TAL-8

8. TAL-37

9. TAL-14

10. TAL-36

11. A-22

12. TAL-26

13. TAL-15

14. TAL-18

15. MIL-11

16. TAL-17

17. TAL-19

18. MIL-12

19. RG-20

20. TAL-33

21. *TN-1

22. TAL-35

23. TAL-28

24. 3A-4

DESCRIPTION

Needle Protection Cap

Head (.25mm, .38mm, .66mm)

(Size TA-1 is used size 01 Tip)Headwith and

Tip (.2mm, .25mm, .38mm, .66mm)

"O" Ring

Shell

Cup Cover

Packing assembly PTFE

Trigger

Air Valve Casing

Air Valve Plunger

Air Valve Spring

"O" Ring

Air Valve Adapter

Rocker Assembly

Needle Spring

Spring Housing

Needle Locknut

"O" Ring

Handle

Needle Stop

Needle (.25mm)

Allen Wrench

Wrench

"O" Ring

Airbrush Operation:

)

NO. PARTDESCRIPTION

Produktspecifikationer