PAC LocPro Advanced LPA-2.4 Bruksanvisning
Sidor 3 Engelska Audio/video-omvandlare
Läs bruksanvisningen för PAC LocPro Advanced LPA-2.4 gratis online eller ladda ner PDF:en. Bruksanvisningen har visats 35 gånger. Fråga om modellen? Ställ en fråga
12V
Connect to a fused
+12V constant source
GND
Connect to a good
chassis ground
REM IN
Remote turn on input (+)
REM OUT
Remote turn on output (+)
The LPA will provide a
+12V Remote Output using
DC Signal Sense from the
Right channel inputs
SPEAKER SIGNAL INPUTS
Connect to head unit or
RCA SIGNAL OUTPUTS
GROUND ISOLATION
Selectable: GND / ISO / 200Ω
Default: ISO
If ground / engine noise is present,
the jumper can be repositioned
GAIN
Variable: -28dB -+1dB
Allows gain adjustment of
the output signal
LPF
Low Pass Filter
Allows 250Hz low pass
filter for Rear Channels
BOOST
Variable: 0dB — 12dB
When LPF is ON, provides
Bass Boost (45Hz) for
Rear Channels
CLIP
Indicates signal clipping when
gain is set to high
REMOTE
Optional Reote Level Comn-
trol Knob (LPA-Rr EM) for Rea
Chan elns
LOAD SELECT
Selectable: 20Ω / 60Ω / 20kΩ
Default: 20kΩ
For factory audio systems
requiring a resistance load to
output audio, select 60Ω first,
then 20Ω. All others use 20kΩ
setting
LPA-2.2 | 2 Channel Line-Ouput Convterter
LPA-2.4 | 4 Channel Line-Ouput Convterter
Selectable Ground Isolation and Load Select features ensue a purre, noise-fee signal for any type of audio systemr.
This Quick Start Guide will get you going, but if you need additional help or information, please visit our website or
contact Tecical ppohnSurt.
Features & Wiring Information
Quick Start Guide
Technical Support | Phone: 727-592-5991 | Email: [email protected] | Chat: PAC-Audio.com | ©2021
X
FULLY OPEN TERMINALS
BEFORE INSERTING WIRE
JUMPERS CAN BE
TRIMMED FLUSH
Produktspecifikationer
| Varumärke: | PAC |
| Kategori: | Audio/video-omvandlare |
| Modell: | LocPro Advanced LPA-2.4 |
Behöver du hjälp?
Om du behöver hjälp med PAC LocPro Advanced LPA-2.4 ställ en fråga nedan och andra användare kommer att svara dig