Panduit CCL3 Bruksanvisning
Läs gratis den bruksanvisning för Panduit CCL3 (4 sidor) i kategorin spår. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 5 recensioner. Har du en fråga om Panduit CCL3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
INSTRUCTIONS V00029AF Rev. 01
© Panduit Corp. 2013, 2014
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
N
ET
-A
CCESS
N-Type and S-Type Cabinets
(CCL3 - Combination Lock Swing Handle
)
CCL3 - Combination Lock Swing Handle Installation
• Reference the latest revisions of the following instruction sheets for door removal (if necessary):
• N-Type Cabinets: CM598
• S-Type Cabinets: CM599
Page 1 of 4
Combination Lock Swing Handle Operation
• Default combination: “0,0,0”
• Set [3] dials to correct combination, or use key to open handle
SET NEW COMBINATION
• Open swing handle
• Rotate handle insert counter-clockwise 30º (from unlocked position) or
210º (from locked position)
• Set [3] dials to desired combination
• Return handle insert to original position
• Close swing handle
[3] Dials
Handle Insert (from unlocked)
(rotate counter-clockwise 30º
from unlocked position to set
new combination)
Handle Insert (from locked)
(rotate counter-clockwise 210º
from locked position to set new
combination)
NOTE
Entire handle assembly
must be removed from door
prior to installation of CCL3
INSTRUCTIONS V00029AF Rev. 01
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 2 of 4
Door
Handle
Backing
Plate
REMOVE:
-Cam Screw
(use 10mm socket wrench)
-Door Cam
-Cam Stop
(note orientation)
S-Type Single Hinge Door
Combination Lock Swing Handle Installation
• Remove Cam Screw (use 10mm socket wrench), Cam Stop (note orientation of Cam Stop), and Cam from existing handle
• Remove Door Handle Backing Plate and remove existing door handle (remove [2] Phillips screws)
• Install Combination Lock Swing Handle by securing Door Handle Backing Plate to Swing Handle with [2] Phillips screws
• Install Cam, Cam Stop, and Cam Screw (use 10mm socket wrench)
• Note orientation of Cam Stop
REMOVE EXISTING
DOOR HANDLE [2] Phillips
Screws
Existing
Door
Handle
INSTALL:
-Cam Screw
(use 10mm socket wrench)
-Door Cam
-Cam Stop
(note orientation)
Door Handle
Backing Plate
[2] Phillips
Screws
Combination Lock
Swing Handle
INSTRUCTIONS V00029AF Rev. 01
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 3 of 4
REMOVE:
-Existing Door Handle
INSTALL:
-Combination Lock
Swing Handle
N-Type Single Hinge Door; N-Type & S-Type Solid Rear Door
Combination Lock Swing Handle Installation
• Remove Cam Screw (use 10mm socket wrench) and Cam Stop (note orientation of Cam Stop) from existing handle
• Remove Door Handle Backing Plate and remove existing door handle (remove [2] Phillips screws)
• Install Combination Lock Swing Handle by securing Door Handle Backing Plate to Swing Handle with [2] Phillips screws
• Install Cam Stop and Cam Screw (use 10mm socket wrench)
• Note orientation of Cam Stop
• Ensure that square cutout of Door Rod Assembly sits securely on Combination Lock Swing Handle
• Ensure that door rods are behind door rod guides
Door
Handle
Backing
Plate
[2] Phillips
Screws
Cam Screw
(use 10mm Socket Wrench)
Cam
Stop
N-Type & S-Type Solid Rear Door
Follow procedure for N-Type Single Hinge Door hanle replacement
Produktspecifikationer
| Varumärke: | Panduit |
| Kategori: | spår |
| Modell: | CCL3 |
Behöver du hjälp?
Om du behöver hjälp med Panduit CCL3 ställ en fråga nedan och andra användare kommer att svara dig
spår Panduit Manualer
28 Augusti 2024
spår Manualer
- Tripp Lite
- Steren
- Middle Atlantic
- Schlage
- Honeywell
- Tryten
- Axa
- Rocstor
- Chief
- Kasp
- Lockly
- Vimar
- Kogan
- Homematic IP
- Silverline
Nyaste spår Manualer
8 April 2025
29 Mars 2025
29 Mars 2025
29 Mars 2025
29 Mars 2025
29 Mars 2025
27 Mars 2025
13 Mars 2025
11 Mars 2025
10 Mars 2025