Panduit LCA4-38-L Bruksanvisning
                    Panduit
                    
                    Kompressor
                    
                    LCA4-38-L
                
                                
    Läs gratis den bruksanvisning för Panduit LCA4-38-L (3 sidor) i kategorin Kompressor. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 10.5 recensioner. Har du en fråga om Panduit LCA4-38-L eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
                        Sida 1/3
                    
                    
                    
COPPER COMPRESSION CONNECTORS
             For Technical Support:    panduit.comtechsupport@
Page 1 of 4
INSTALLATION INSTRUCTIONS T-PMPI-63-PC
C 
Panduit Corp. 2024
Rev 1 1
1. Use a connector marked for the wire size and wire material to be used.  NEVER
use a copper connector on aluminum wire.
2.
Strip wire insulation to approximate length shown on tool chart.  DO NOT nick 
or
ring the conductor strands.
3.
Clean the wire.
4.
Insert stripped wire into connector until the wire stops.
5.
Using installation tooling shown on other side, insert connector in die and crimp
between color bands or knurl markings, use these markings as a guide to evenly
space crimps on barrel of connector. Begin crimping near the tongue end of
the lug and continue crimping toward the wire end.
IMAGES BELOW DEPICT CRIMP ZONES, AND SERVE AS  GENERAL GUIDELINES FORA
THE CRIMP AREA. REQUIRED NUMBER OF COMPRESSIONS SHOWN ON TOOL
CHART IN ( ) ON PAGES 2,3 & 4 BASED ON TOOL AND DIE COMBINATION USED.
6.
After crimping, inspect for sharp edges, flash or burrs and remove if present.
COPPER COMPRESSION CONNECTOR INSTALLATION
   1
1   2
1   2   3
1  2  3  4
#   ZONESOF CRIMP : 1
#   ZONESOF CRIMP : 2
#   ZONESOF CRIMP : 3
#   ZONESOF CRIMP : 4
Produktspecifikationer
| Varumärke: | Panduit | 
| Kategori: | Kompressor | 
| Modell: | LCA4-38-L | 
Behöver du hjälp?
Om du behöver hjälp med Panduit LCA4-38-L ställ en fråga nedan och andra användare kommer att svara dig
Kompressor Panduit Manualer
                        
                         1 April 2025
                        
                    
                                                            
                        
                         1 April 2025
                        
                    
                                                            Kompressor Manualer
- Fieldmann
- Hitachi
- California Air Tools
- Bimar
- King Craft
- Greenworks
- Global
- Altrad
- NEO Tools
- Ultimate Speed
- Toolcraft
- Ryobi
- Fuxtec
- Cocraft
- OKAY
Nyaste Kompressor Manualer
                        
                         13 Oktober 2025
                        
                    
                                                            
                        
                         13 Oktober 2025
                        
                    
                                                            
                        
                         13 Oktober 2025
                        
                    
                                                            
                        
                         13 Oktober 2025
                        
                    
                                                            
                        
                         12 Oktober 2025
                        
                    
                                                            
                        
                         12 Oktober 2025
                        
                    
                                                            
                        
                         12 Oktober 2025
                        
                    
                                                            
                        
                         12 Oktober 2025
                        
                    
                                                            
                        
                         12 Oktober 2025
                        
                    
                                                            
                        
                         12 Oktober 2025