Panduit PED8B1 Bruksanvisning


Läs gratis den bruksanvisning för Panduit PED8B1 (6 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 6 recensioner. Har du en fråga om Panduit PED8B1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/6
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
INSTRUCTIONS CM592A
© Panduit Corp. 2014
Door
Part Number Single Sided Dual Sided
PED6B1 PEVF6 PEV6
PED8B1 PEVF8 PEV8
PED10B1 PEVF10 PEV10
PED12B1 PEVF12 PEV12
Corresponding Vertical Manager
Page 1 of 5
PatchRunnerTM High Capacity Vertical Doors
Part Numbers: PED6B1, PED8B1, PED10B1, PED12B1, PED696B1, PED896B1,
PED1096B1, PED1296B1
Installation Instructions-Mounting Door to PEV Manager-
Step 3: Ensure that both handles are in the
disengaged position.
Handles
disengaged
Step 4: Set door onto ends of door bracket located
on the bottom of the manager. Then ensure that
activation tabs on the door bracket fit into windows
on the door.
Activation Tabs
Windows on door
Step 5: Fit activation tabs located on the top door
bracket into the windows located on top of the door.
Activation Tabs
Windows on door
Handles engaged
Step 6: Grasp fingers of manager with fingers and
apply thumb to door face. Then squeeze together
until handles pop into engaged position.
Step 1: Using a flat object, remove the grommets
from the rear of the door. The door brackets can
now be installed.
Door brackets
Remove grommets
Bottom of manager
Top of manager #12-24 Screws
Step 2: Install door brackets to manager as shown
using #12-24 screws Tighten screws to 15 in-lbs.
7FT Sizes


Produktspecifikationer

Varumärke: Panduit
Kategori: Inte kategoriserad
Modell: PED8B1

Behöver du hjälp?

Om du behöver hjälp med Panduit PED8B1 ställ en fråga nedan och andra användare kommer att svara dig