Parat Parasync Bruksanvisning

Parat Vagga/dockningsstation Parasync

Läs gratis den bruksanvisning för Parat Parasync (6 sidor) i kategorin Vagga/dockningsstation. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 2.5 recensioner. Har du en fråga om Parat Parasync eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/6

USER GUIDE

PARASYNC for iPod/iPhone®

20-unit Charging and Synchronization Dock

For assistance, please contact PARAT Solutions

Toll free: 866-647-5976

Email: support@paratsolutions.com

31 Waterloo Avenue | Berwyn, PA 19312 T: 610-647-5976 F: 610-296-2504 paratsolutions.com| | |

PARASYNC for iPod/iPhone®

20-unit Charging and Synchronization Dock

Product description:

Charge and sync up to 20 Apple iPod/iPhone® devices. Two auxiliary USB ports may be

used to attach USB peripherals.

INITIALIZATION

The following device settings are recommended when syncing with PARASYNC:

Model Recommended settings

iPod® nano/classic Clear “Open iTunes when this iPod is attached” option listed in

iTunes on the Summary tab

iPod® touch Set “Open iTunes when this iPod is attached” option listed in iTunes

on the Summary tab

iPhone® Set “Automatically sync when this iPhone is connected” option listed

in iTunes on the Summary tab

31 Waterloo Avenue | Berwyn, PA 19312 T: 610-647-5976 | | F: 610-296-2504 paratsolutions.com|

OPERATION

To charge devices without a computer connection:

1. Connect the AC power cord to the power supply and plug into a wall outlet.

2. Connect the power supply to the dock Power connector.

3. Press and release the Power button to turn on the dock (Status Indicator turns solid green).

4. Insert iPod/iPhone® devices into slots.

Note: Each iPod/iPhone® indicates its charge status. Refer to iPod/iPhone® product

manuals for details.

To sync devices:

1. If the dock is already charging devices without a computer connection, skip to step 3.

2. Follow steps 1 through 3 from section “To charge devices without a computer

connection”.

3. Connect the included USB cable from an Apple computer USB port to the USB port for

computer connection on the dock. The dock Status Indicator will display rapid flashing

followed by slow flashing, which indicates that the dock is ready for syncing.

4. Use Apple iTunes® to sync devices.

Note: The devices will charge after syncing completes. You can also charge the units

without a computer by simply unplugging the USB cable to the computer after syncing

completes.

To turn the dock off:

1. If the dock is connected to a computer: verify that syncing operations are complete and

then disconnect the dock from the computer.

2. Press and hold Power button until Status Indicator turns off (about 2 seconds).

31 Waterloo Avenue | Berwyn, PA 19312 T: 610-647-5976 F: 610-296-2504 paratsolutions.com| | |

Produktspecifikationer

Varumärke:	Parat
Kategori:	Vagga/dockningsstation
Modell:	Parasync
Bredd:	800 mm
Djup:	620 mm
Höjd:	1460 mm
Antal hyllor:	1 schappen
Maximal viktkapacitet:	40 kg
Ramfärg:	Zwart
VESA montering:	Ja
Panelmonteringsgränssnitt:	600 x 400 mm
Rammaterial:	Staal
Bas med 360 graders rotationsvinkel:	Ja
Tiltvinkelområde:	-20 - 20 °
Maximal skärmstorlek:	42 "
Antal förpackningskartor:	1
Lastad:	Nee
Hyllor:	Ja
Färg topp:	Zwart
Färg planka:	Zwart