PCE Instruments PCE-TUM 50 Bruksanvisning
PCE Instruments
Mätutrustning
PCE-TUM 50
Läs gratis den bruksanvisning för PCE Instruments PCE-TUM 50 (16 sidor) i kategorin Mätutrustning. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 9 recensioner. Har du en fråga om PCE Instruments PCE-TUM 50 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/16
PCE-TUM 50 Turbidity Meter
Instruction Manual
1
Introduction
Thank you for selecting the -TUM 50 benchtop turbidity meter. This meter operates on the nephelometric principle of turbidity measurement and is PCE
designed to meet the criteria specified in ISO 7027. This manual provides a step- -step guide to help you operate the meter, please carefully read the by
following instructions before use.
Unpacking
Before unpacking, ensure that the current work environment meet following conditions.
• Relative humidity is less than 80 %.
• Ambient temperature is greater than 0 and less than 60 . °C °C
• No potential electromagnetic and ambient light interference.
The following list describes the standard components of the meter. After the unpacking, please check all components are complete. If any are damaged
or missing, please contact nearest distributor.
1 x Turbidity meter PCE-TUM 50
1 x Cuvette with lid
4 x Calibration cuvettes turbidity
1 x AC Power adapter
1 x Cleaning cloth
1 x User manual
2
Keypad
The PCE-TUM 50 turbidity meter is designed with a 6 key, names and symbols describe each function key controls.
KEY
FUNCTION
ESC
•Switches the meter ON/OFF.
•Exits the calibration or setting and returns to measurement.
CAL
•Starts calibration.
•Enters the setup menu (Press and hold the key for 3 seconds).
◄ MI
•Stores current reading to memory.
•Increase value or scroll up through the menu item.
► MR
•Views the stored data.
•Decrease value or scroll down through the menu item.
ENTER
•Confirms the calibration, settings or displayed options.
MEAS
•Starts measurement.
•Locks the measured value.
Connecting the Power Adapter
• Before plugging in the power adapter, ensure that its voltage matches the local main voltage.
• Insert the connector of power adapter into the power socket on the rear panel of the meter. The meter is now ready for use.
Switching the Meter On and Off
• Press the key to switch on the meter, the display shows the measured value.
• Press and hold the key for 3 seconds, the meter will switch off.
Prior to Use
Switch on the meter and allow the meter to warm up for at least 15 minutes.
Produktspecifikationer
| Varumärke: | PCE Instruments |
| Kategori: | Mätutrustning |
| Modell: | PCE-TUM 50 |
Behöver du hjälp?
Om du behöver hjälp med PCE Instruments PCE-TUM 50 ställ en fråga nedan och andra användare kommer att svara dig
Mätutrustning PCE Instruments Manualer
29 Mars 2025
28 Mars 2025
28 Mars 2025
28 Mars 2025
28 Mars 2025
28 Mars 2025
28 Mars 2025
28 Mars 2025
28 Mars 2025
28 Mars 2025
Mätutrustning Manualer
- Grundfos
- Alecto
- Nedis
- MGL Avionics
- EBERLE
- Kogan
- Stamos
- Perel
- TDE Instruments
- Hikmicro
- Kopp
- Testo
- SIIG
- Basetech
- Elgato
Nyaste Mätutrustning Manualer
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025