Peak LCR45 Bruksanvisning
Peak
Mätutrustning
LCR45
Läs gratis den bruksanvisning för Peak LCR45 (28 sidor) i kategorin Mätutrustning. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 6.5 recensioner. Har du en fråga om Peak LCR45 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/28
Designed and manufactured with pride in the UK
User Guide
©
Peak Electronic Design Limited 20022014
In the interests of development, information in this guide is subject to change without notice E&OE
GB453
Atlas User Guide March 2014 – Rev 3
Page 2
Want to use it now?
We understand that you want to use your Atlas LCR45 now.
The unit is ready to go, but please make sure that you do read
through pages 34.
Contents Page
Introduction......................................................................... 3
Important Notices 4..............................................................
Introductory notes about impedance ................................... 5
User Interface...................................................................... 7
Using your LCR45 .............................................................. 8
Component Display ....................................................... 8
Impedance Display ........................................................ 9
Admittance Display ..................................................... 10
Magnitude and Phase Display ..................................... 11
Modes and Settings...................................................... 12
Frequency Mode Selection .......................................... 14
Testing Capacitors ....................................................... 15
Capacitance Ranges .......................................................... 16
Inductance Ranges ............................................................ 17
Probe Compensation ......................................................... 18
Taking care of your LCR45 .............................................. 20
Self Tests........................................................................... 21
Appendix A – Display Units ............................................. 22
Appendix B – Accessories ................................................ 23
Appendix C – Auto Component Identification Criteria .... 24
Appendix D – Technical Specifications ............................ 26
Appendix E – Troubleshooting ......................................... 27
Appendix F – Statutory Information ................................. 28
Atlas User Guide March 2014 – Rev 3
Page 3
Introduction
The Atlas LCR45 is an enhanced handheld instrument capable of performing
detailed analysis of passive components such as inductors, capacitors and
resistors.
As well as standard component identification and value measurement, the
LCR45 can provide a detailed impedance analysis of your component.
The LCR45 can be used in a fully automatic mode, or a number of manual
modes, giving you an ideal combination of speed and flexibility.
Both the component type and test frequency can be set to automatic or manual
modes.
In all modes, the LCR45 provides detailed measurement data including:
Component type.
Component value in real engineering units.
Secondary component value (such as DC resistance of inductors).
Test frequency used.
Complex impedance measurement ( and portions).
Complex admittance measurement ( and portions).
Magnitude and Phase of the impedance measurement.
Additional features include:
Fast start.
Continuous fluid measurements (with hold function).
Comprehensive probe compensation measurement.
Enhanced measurement resolution.
Enhanced compensation for component parasitics such as core
losses, dielectric losses etc.
Simple menu system.
Nonvolatile user settings.
Produktspecifikationer
| Varumärke: | Peak |
| Kategori: | Mätutrustning |
| Modell: | LCR45 |
Behöver du hjälp?
Om du behöver hjälp med Peak LCR45 ställ en fråga nedan och andra användare kommer att svara dig
Mätutrustning Peak Manualer
21 September 2024
21 September 2024
21 September 2024
3 September 2024
31 Augusti 2024
30 Augusti 2024
30 Augusti 2024
29 Augusti 2024
28 Augusti 2024
27 Augusti 2024
Mätutrustning Manualer
Nyaste Mätutrustning Manualer
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025