Peavey Nashville 112 Bruksanvisning
Läs gratis den bruksanvisning för Peavey Nashville 112 (12 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 3 recensioner. Har du en fråga om Peavey Nashville 112 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12
www.peavey.com
Nashville™ 112
Amplier
Operating
Manual
FCC/ICES Compliancy Statement
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS Standard(s). Operation is
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, that may cause undesired operation.
Le présent appareil est conforme aux CNR d’lndustrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes: (1) I’appareil ne doit pas produire de
brouillage, et (2) I’utilisateur de I’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Warning: Changes or modifications to the equipment not approved by Peavey Electronics Corp. can void the
user’s authority to use the equipment.
Note – This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
4
Congatulations on your purchase of the Peavey Nashville 112. As the leader in steel guitar amplification,
we are proud to offer you this smaller, more portable, lightweight cousin to the popular Nashville 1000
amplifier. This amp has all of the same front panel features as the 1000 along with a newly designed 80
Watt power section, an added headphone jack, and a CD input which makes it an ideal choice for practice
or small venues. The Nashville 112 also features a long-pan Accutronics reverb and a Celestion Sterling
F250 speaker that has been carefully voiced for steel guitar applications.
We know you are anxious to start playing, so we’ve included a “Quick Start” section and a
“Recommended Settings” section. These are certain to get you on your way. However,
i
t is important that
you read the safety precautions first
. Scan through this manual and locate
these safety icons:
Each safety icon is followed by a warning. Read that warning carefully before continuing. Once you have
read all of the warnings ,refer to the “Quick Start” section below if you so desire. It is recommended that
you read this manual in its entirety to fully understand the functions of each
feature.
Q
uick Start - I just wanna play!
The following section takes a “jump in and get your feet wet” approach. If any part seems confusing, refer to the
more detailed sections that follow.
Step 1. Insure that you have read and understand all safety warnings noted through-out the manual. It is
imperative that you follow these precautions for the safety of yourself and your amp.
Step 2. With the amp turned off, plug the power cord into the proper voltage supply indicated on the back of the
unit near the cord retainer.
Step 3. Plug your guitar into either the High or Low Gain input and turn all knobs counterclockwise to their “0”
position.
Step 4. Using the “Recommended Settings” on page 8, find the type of tone that most closely resembles the tone
you wish to obtain.
Step 5. Set the knobs on the front of the unit to match the setting you have selected.
Step 6. Turn your guitar volume down and turn the amp on via the power switch on the back of the unit.
Step 7 Gradually turn the volume of your guitar all the way up or until you are comfortable with the level/tone.
Step 8 To adjust the overall level, use the Master Gain control.
Step 9. To adjust out any undesirable distortion, use the Pre Gain knob. Turning the knob counter-clockwise results
in a decreased level, thus reducing the overdriven signal. Any external effects units can also cause the signal to
overdrive.
Step 10. You should be able to play at this time. Vary the Reverb and/or EQ knobs to get a feel for their effect on
your tone. Most importantly....
R
EAD THE REST OF THIS MANUAL
.
ENGLISH
Produktspecifikationer
| Varumärke: | Peavey |
| Kategori: | mottagare |
| Modell: | Nashville 112 |
Behöver du hjälp?
Om du behöver hjälp med Peavey Nashville 112 ställ en fråga nedan och andra användare kommer att svara dig
mottagare Peavey Manualer
10 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
8 September 2025
8 September 2025
8 September 2025
mottagare Manualer
- Smart
- Eventide
- Sound Devices
- Monoprice
- Pro-Ject
- IMG Stageline
- Trust
- Twelve South
- EMOS
- Medeli
- Oculus VR
- Jung
- Pharos
- Intelix
- C2G
Nyaste mottagare Manualer
15 September 2025
14 September 2025
14 September 2025
14 September 2025
14 September 2025
14 September 2025
14 September 2025
13 September 2025
13 September 2025
13 September 2025