Peavey SP 218 Bruksanvisning

Läs gratis den bruksanvisning för Peavey SP 218 (8 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 4 recensioner. Har du en fråga om Peavey SP 218 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

www.peavey.com

SP®218

Passive Sub

Product

Specications

ENGLISH

Description

e SP® 218 is a subwoofer designed to enhance the low-end in the SP Series or other full-range speaker systems. Other

uses include bass guitar, keyboard and drum monitoring. is loudspeaker system delivers high output, low distortion bass

from two 18” Pro Rider woofers mounted in a vented enclosure. is unit is designed for portability. e enclosure is con-

structed of hardwood plywood augmented with internal braces with a textured black painted nish. A full-length, wrap-

around perforated steel grille protects the front of the enclosure. Tilt-back casters are mounted at the rear bottom corner

to assist in portability. A pole mount plate is located on the right hand side of the enclosure, with an insert for a threaded

pole, using M20 threads. e threaded pole is included. Rubber feet and corner casters on the bottom and a corner handle

on top make moving the enclosure an easy, one-person operation.

Inputs are at the rear of the enclosure and consist of two 1/4” jacks, one four-pin twist-lock non-switching jack and one

Neutrik® Speakon® switching jack. e enclosure input is congurable, with the default being 4 ohms with both drivers in

parallel when using the parallel inputs. A dual-woofer 2 x 8 ohm conguration is available through the switching Neutrik®

jack, which disconnects the 4 ohm inputs and provides separate inputs to the woofers when used. is ingenious input de-

sign provides maximum exibility for single-or dual-amplier operation, without having to manually rewire the enclosure.

is low frequency enclosure is comprised of two 18” Pro Rider® subwoofer drivers in a vented alignment. e Pro Rider

driver delivers superior performance due to its advanced cooling system, large 4” voice coil with edge-wound aluminum

wire and high performance cone. is design provides strong bass extension and high power handling to complement a

full-range sound system.

As the SP 218 does not include a passive subwoofer crossover, input should be electronically ltered for subwoofer appli-

cations. In addition, for high power operation, a high-pass lter set at 36 Hz and using a 24 dB/octave Linkwitz-Riley lter

should be used to improve performance and reliability.

Features

• Two 18” Pro Rider® woofers

• 2,400W program, and 4,800W peak power handling

• Low frequency response down to 41 Hz.

• Inputs include one four-pin twist lock connector and two 1/4” phone jacks all in parallel, and one Neutrik®

Speakon® switching jack for independent access to the woofers

• readed pole for mount included

• Pole mount plate built-in, threaded for positive pole support

• Full-length, wrap-around perforated steel grille

• Tilt-back casters

Produktspecifikationer