Peerless PAP-298 Bruksanvisning

Läs gratis den bruksanvisning för Peerless PAP-298 (1 sidor) i kategorin Projektor tillbehör. Guiden har ansetts hjälpsam av 33 personer. Har du en fråga om Peerless PAP-298 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

/ 1 PDF

ISSUED: 04-19-07 SHEET #: 055-9489-1

Visit the Peerless Web Site at www.peerlessmounts.comFor customer care call 1-800-729-0307 or 708-865-8870.

1 of 1

Note: Actual parts may appear slightly different than illustrated.

Installation and Assembly - Projector Adapter Plate for

Panasonic®PT-F100NT, PT-FW100NTU and PT-F100U Projector

Models:PAP 298, PAP 298-S,

PAP 298-W

DescriptionQty.PAP 298PAP 298-SPAP 298-W

A Aadapter plate1055-1754055-4754055-2754

B BM4 x 20 mm socket pin serrated washer head screw4510-1061510-2163510-2163

CC retaining spacer4590-2020590-2009590-2009

DD 4mm security allen wrench (for PAP only)1560-9646560-9646560-9646

Parts List

DD

AA

CC

BB

© 2007Peerless Industries, Inc. All rights reserved.

Peerless is a registered trademark of Peerless Industries, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.

IMPORTANT! Read entire instruction sheet before you

start installation and assembly.

Before you start check the parts list below to make sure all

of the parts shown are included.

•Installer must verify that the supporting surface will

safely support the combined weight of all attached

equipment and hardware.

WARNING

Retaining spacers (CC) go

between adapter plate

(AA) and projector.

Flip projector upside down. Attach adapter plate (AA)using four retaining spacers (CC) and four M4 x 20 mm socket pin

serrated washer head screws (BB). Tighten using 4 mm security allen wrench (DD) .

* Notch indicates front of projector

*

BB

AA

Produktspecifikationer