Philips SPP6110BC Bruksanvisning

Läs gratis den bruksanvisning för Philips SPP6110BC (2 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 2 recensioner. Har du en fråga om Philips SPP6110BC eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
MADE IN CHINA
Philips and the Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used
under license. This product has been manufactured by
and is sold under the responsibility of Jasco Products
Company, and Jasco Products Company LLC, 10 E.
Memorial Rd, Oklahoma City, OK 73114 is the warrantor
in relation to this product.
Visit www.philips.com/support for warranty details.
Questions? Contact our US-based Consumer Care
at 1-844-816-0320 between 7AM—8PM CST.
RISK OF ELECTRIC SHOCK
• DO NOT USE IN WET LOCATIONS
KEEP CHILDREN AWAY
• USE INDOORS ONLY
• FULLY INSERT PLUG
RISK OF FIRE
• DO NOT EXCEED
ELECTRICAL RATINGS
NOT FOR USE WITH
• AQUARIUMS OR OTHER WATER-
RELATED PRODUCTS
• GENERATORS AND
POWER INVERTERS
• MEDICAL LIFE-SUPPORT
PRODUCTS
WARNING
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, USE ONLY INDOORS.
UNIT SHOULD BE PLUGGED INTO AN INTERIOR GROUNDED
PARALLEL DUPLEX RECEPTACLE. NOT FOR USE WITH GROUND-
FAULT CIRCUIT-INTERRUPTER RECEPTACLES OR RECEPTACLES
WITH INDICATOR LIGHTS OR CONTROL. TO REDUCE THE RISK
OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS DEVICE WITH A
RECEPTACLE IN WHICH THE SLOT OPENINGS DO NOT ALIGN WITH
THE BLADES.
1. Plug the surge protector into a standard grounding
duplex wall receptacle. Ensure that there are no
exposed conductors.
2. Make sure electronic equipment is turned o before
plugging into the surge protector outlets. Do not use
extension cords to connect equipment to the
surge protector.
3. Move power switch to RESET.Your surge unit should
be providing surge protection.
4. Connected equipment can now be turned on.
NOTE: In the event that the protection capacity
is exceeded by a power surge or the protection
components expire, the power will be permanently shut
down to the outlets, ensuring surge protection for your
electronic equipment. At this time, the surge protector
has reached end of life and must be replaced.
Surge Protector Limited-Lifetime Warranty
This surge protector is warranted to be free of defects in
workmanship and/or materials for the life* of the surge
protector. If such a defect should arise during the life of
the surge protector, we will, at our option, either repair or
replace the surge protector without charge. This warranty
does not cover damage caused by lightning, accident,
misuse, or alterations to the surge protector.
* This surge protector, like all surge protectors, has a nite
lifespan. Even under normal circumstances and in the
absence of defects, the products life will expire when the
surge protectors component capacity has been exceeded,
thereby ceasing to provide protection from surges.
Warranty replacement procedure
1. Call our Customer Information Center at 1-844-816-0320
to get a Return Authorization Number (RA#), shipping
instructions and a prepaid return address label.
2. Return the said surge protector, freight prepaid, to
us. Surge protectors returned to us must have an RA#
included in the mailing address to be accepted.
3. The original purchaser will be asked to send the surge
protector, a copy of the sales receipt for the product,
the problem.
Connected Equipment Warranty
Equipment Replacement Guarantee for
Surge Model: SPP3064WE/37
Maximum Warranty Amount: $75,000(USD)
aord protection when lightning strikes nearby power line,
the house, service entrance or antenna. The warranty is void
if a power disturbance damages your equipment through
the coax, phone or network lines.
We will pay up to the maximum warranty amount
oered for the surge protector purchased to repair or
replace up to an amount equal to the fair market value
or the original purchase price, whichever is less, of your
electronics equipment, if damaged by a transient surge
(except those caused by direct lightning), within the
life* of the surge protector, while properly and directly
connected to this surge protector. DISCLAIM AND WE
ASSUME NO LIABILITY FOR ANY OTHER INCIDENTAL
OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT
LIMITED TO LOSS OR DAMAGE TO SOFTWARE OR DATA
OR DAMAGES OR COSTS ASSOCIATED WITH BUSINESS
INTERRUPTION OR OTHER DAMAGES DUE TO LOSS OR
DAMAGE TO EQUIPMENT, SOFTWARE OR DATA. Some
states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty gives you
specic legal rights, and you may also have other rights
that may vary from state to state.
This warranty is secondary to any existing coverage of any
connected equipment, including but not limited to, any
manufacturers warranty, extended warranties, or insurance
coverage.
To qualify for a connected equipment warranty:
1. All connected equipment must be safety certied by a
Nationally Recognized Testing Laboratory.
2. The said surge protector must be plugged into properly
wired and grounded outlets, no extension cords,
adapters, other ground wires or electrical connectors
may be used, with the sole exception of other standard
120 volt products approved for that use. The installation
must comply with all applicable electrical and safety
codes set forth pursuant to the National Electrical
Code (NEC).
3. Any claim under the warranty policy must be made
within 15 days of the date of the alleged damage to the
connected equipment.
For connected equipment coverage, the following
conditions must be satised:
A. All equipment eligible for warranty coverage must be
plugged directly into said surge protector. Equipment
connected to the protected equipment, but not plugged
directly into the surge protector will not be covered.
B. The equipment must have been damaged by a covered
power disturbance that passed through the said surge
protector.
C. The said surge protector must be damaged from the
power disturbance.
D. The said surge protectors protection capacity must not
have been exceeded.
Connected equipment claim procedure:
1. Call our Customer Information Center at 1-844-816-0320
to get a Return Authorization Number (RA#), shipping
instructions and a prepaid return address label.
2. After you have received the prepaid return address label,
return the surge protector, freight prepaid, to us. Surge
protectors returned to us must have an RA# included in
the mailing address to be accepted.
3. We will determine whether the damage to your
equipment is covered by this warranty policy. If you are
covered, a claims adjuster will contact you and we will do
one of the following at our own discretion:
a. Authorize a service center to repair damaged
equipment.
b. Replace damaged equipment with equivalent
or better.
c. Reimburse customer the fair market value of the
damaged equipment.
d. Reimburse customer the initial purchase price of the
damaged equipment (customer to provide dated bill
of sale).
4. We retain the right to determine whether the damage to
the connected equipment is due to said surge protector
failure by requesting that damaged equipment be sent
to us for inspection.
User manual
SPP3064WE/37 v2
11/14/18
THIS PACKAGE IS
RECYCLABLE
1. Enchufe el supresor de sobretensiones en un
tomacorriente mural estándar doble con conexión a
tierra. Asegúrese de que no haya ningún conductor
expuesto.
2. Asegúrese de que el equipo electrónico esté apagado
antes de enchufarlo al tomacorriente del supresor de
sobretensiones. No utilice un cable de extensión para
conectar el equipo al supresor de sobretensiones.
3. Coloque el interruptor de tensión en posición RESET
(reiniciar). El supresor debería haber quedado
habilitado para proteger contra sobretensiones.
4. Ahora puede encender el aparato conectado.
NOTA: En el caso de que se produzca una sobretensión
que supere la capacidad de protección o que algún
componente de protección esté vencido, el suministro
de energía a los tomacorrientes quedará interrumpido
de manera permanente a n de proteger sus aparatos
electrónicos. En este momento, la vida útil del
supresor de sobretensiones se p2-ha terminado y deberá
reemplazarse.
Supresor de sobretensiones
Garantía de por vida limitada
Se garantiza que este supresor de sobretensiones no
tendrá defectos de materiales o de manufactura durante
toda su vida útil. En caso de que surgiese algún defecto
durante la vida útil del supresor de sobretensiones,
repararemos o reemplazaremos, según nuestro criterio,
el supresor de sobretensiones sin ningún cargo.
La presente garantía no cubre daños producidos por
rayos eléctricos, accidentes, maltrato o modicaciones
al supresor de sobretensiones.
*Este supresor de sobretensiones, como cualquier
supresor de sobretensiones, tiene una vida útil limitada.
Incluso en circunstancias normales y ante la ausencia de
defectos, la vida útil de este producto terminará cuando
se haya agotado la capacidad de los componentes del
producto, y en tal momento dejará de proporcionar
protección contra sobretensiones.
Procedimiento de la garantía para la reposición
1. Llame al centro de atención al cliente al 1-844-816-
0320 para obtener un número de autorización de
devolución (RA#), así como las instrucciones para el
envío y una etiqueta prepagada con la dirección para
la devolución.
2. Envíenos el supresor de sobretensiones, con franqueo
pagado. A n de que se acepten los supresores de
sobretensiones devueltos, estos deben incluir el número
RA en la dirección postal.
3. Se le solicitará al comprador original que envíe el
supresor de sobretensiones, una copia del recibo de
compra del producto y que especique su nombre,
dirección, número telefónico y una descripción del
problema.
Garantía de equipos conectados
Garantía de reposición de aparatos para el modelo
de supresor: SPP3064WE/37
Monto máximo de la garantía: USD $75,000
NOTA: Este dispositivo no es un pararrayos, de modo que
no ofrece protección cuando caiga un rayo en los cables
de tensión cercanos, en la casa, entrada de servicio o en
la antena. La garantía queda anulada si una perturbación
eléctrica causa daños a su equipo a través del cable
coaxial, telefónico o de la red.
Pagaremos hasta el importe máximo de la garantía
ofrecida por el supresor de sobretensiones para reparar
o cambiar el aparato electrónico hasta un monto
igual al valor real de mercado o al precio de compra
original, el que fuera menor, si se produce un daño por
sobretensiones transitoria (salvo la provocada por la caída
directa de un rayo) dentro de la vida útil* del supresor de
sobretensiones, siempre y cuando el aparato electrónico
dañado haya estado debida y directamente conectado
a este supresor de sobretensiones. NO ASUMIMOS
NINGUNA RESPONSABILIDAD POR DAÑOS Y PERJUICIOS,
INCIDENTALES O CONSECUENTES, INCLUSO DE MANERA
NO LIMITATIVA: POR LA PÉRDIDA O DAÑO DE SOFTWARE
O DATOS O DOS O COSTOS ASOCIADOS CON LA
INTERRUPCIÓN DE LAS ACTIVIDADES COMERCIALES
U OTROS DAÑOS, DEBIDO A LA PÉRDIDA O DAÑO DEL
EQUIPO, DEL SOFTWARE O DE DATOS. Algunos países
no permiten la exclusn o limitación de la cláusula sobre
daños incidentales o consecuentes, por este motivo las
limitaciones arriba mencionadas pueden no aplicarse
en su caso. Esta garantía le otorga derechos legales
especícos, es posible que tenga otros derechos que
pueden variar según el estado en el que vive.
Esta garantía es secundaria a cualquier otra cobertura
existente que tengan los equipos conectados, incluso,
de manera no limitativa, a toda garantía del fabricante,
garantías ampliadas o coberturas de seguros.
Para calicar para la garantía de equipos conectados:
1. Todos los equipos conectados deben contar con un
certicado de seguridad emitido por un laboratorio de
pruebas reconocido a nivel nacional.
2. El supresor de sobretensiones debe estar enchufado
a un tomacorriente correctamente cableado y
con conexión a tierra; no se deben usar cables de
extensión, adaptadores, otros cables de conexión a
tierra ni conectores eléctricos; solo se podrán usar
otros productos estándar de 120 V aprobados para
dicho uso. La instalación debe cumplir con todos los
códigos eléctricos y de seguridad conformes al Código
Estadounidense de Normas de Electricidad (NEC).
3. Todo reclamo presentado durante la validez de la póliza
de garantía se debe realizar en un plazo de 15 días
tras haberse producido el supuesto daños del equipo
conectado.
Se deben cumplir las siguientes condiciones para obtener
la cobertura del equipo conectado:
A. El equipo elegible para recibir la cobertura de la
garantía debe estar enchufado directamente al supresor
de sobretensiones. Todo equipo que esté conectado al
equipo protegido, pero no esté enchufado directamente
al supresor de sobretensiones, no estará cubierto por
esta garantía.
B. El equipo deberá haber sido dañado por una
perturbación eléctrica —cubierta por la garantía
que haya atravesado al supresor de sobretensiones.
C. El supresor de sobretensiones tuvo que haber sido
dañado por dicha perturbación eléctrica.
D. No deberá haberse superado la capacidad de
protección del supresor de sobretensiones.
Procedimiento de reclamo para equipos conectados:
1. Llame al centro de atención al cliente al 1-844-816-0320
para obtener un número de autorización de devolución
(RA#), así como las instrucciones para el envío y una
etiqueta prepagada con la dirección para
la devolución.
2. Una vez que haya recibido la etiqueta prepagada con
la dirección para la devolución, envíenos el supresor
de sobretensiones, franqueo pagado. A n de que se
acepten los supresores de sobretensiones devueltos,
estos deben incluir el número RA en la dirección postal.
3. Determinaremos si el daño del equipo está cubierto
por esta póliza de garantía. Si está cubierto, el tasador
responsable del reclamo se contactará con usted,
y tomaremos, a nuestra total discreción, una de las
siguientes medidas:
a. Autorizaremos a un centro de reparaciones para
reparar el equipo dañado.
b. Cambiaremos el equipo dañado por otro
equivalente o mejor.
c. Reembolsaremos al cliente el valor real de mercado
del equipo dañado.
d. Reembolsaremos al cliente el precio de compra
original pagado por el equipo dañado (el cliente
deberá proporcionar la factura de compra fechada).
4. Nos reservamos el derecho de determinar si el daño al
equipo conectado se debe a una falla del supresor de
sobretensiones; para ello, podrá solicitar que se le ene
el equipo dañado para su inspección.
PRECAUCIÓN: PARA REDUCIR EL
RIESGO DE DESCARGA ELÉCTRICA,
UTILICE SOLO EN ESPACIOS INTERIORES.
LA UNIDAD DEBERÁ CONECTARSE A UN TOMACORRIENTE DOBLE
DE RANURAS PARALELAS CON CONEXIÓN A TIERRA NO SE
DEBE USAR CON TOMACORRIENTES DE CIRCUITO DE FALLOS DE
CONEXIÓN A TIERRA O CON TOMACORRIENTES CON CONTROLES
O LUCES INDICADORAS. PARA REDUCIR EL RIESGO DE INCENDIO
O DE DESCARGA ELÉCTRICA, NO UTILICE ESTE DISPOSITIVO CON
UN TOMACORRIENTE CUYAS RANURAS NO SE ALINEEN CON LAS
CLAVIJAS.
RIESGO DE DESCARGA ELÉCTRICA
• NO UTILICE EN LUGARES
HÚMEDOS
• MANTENGA FUERA DEL ALCANCE
DE LOS NIÑOS
• SOLO PARA USO EN INTERIORES
• ENCHUFE COMPLETAMENTE LA
CLAVIJA
RIESGO DE INCENDIO
• NO SUPERE LOS VALORES
NOMINALES ELÉCTRICOS
NO USAR CON
• ACUARIOS NI OTROS
PRODUCTOS QUE TENGAN AGUA
• GENERADORES Y
TRANSFORMADORES
• EQUIPOS PARA EL
MANTENIMIENTO DE FUNCIONES
VITALES
ADVERTENCIA
HECHO EN CHINA
Philips y el emblema de escudo Philips son marcas
registradas de Koninklijke Philips N.V. y se usan
bajo licencia. Este producto p2-ha sido fabricado y se
comercializa bajo responsabilidad de Jasco Products
Company y Jasco Products Company LLC,
10 E. Memorial Rd, Oklahoma City, OK 73114, es el
garante en relación a este producto.
Este producto tiene una garantía limitada de por vida.
Visite www.philips.com/support para conocer los
detalles de la garantía.
¿Tiene preguntas? Comuníquese al 1-844-816-0320
entre las 7:00 a. m. y las 8:00 p. m. CST (hora central
estándar).
Manual de usuario
THIS PACKAGE IS
RECYCLABLE

Produktspecifikationer

Varumärke: Philips
Kategori: ej kategoriserat
Modell: SPP6110BC

Behöver du hjälp?

Om du behöver hjälp med Philips SPP6110BC ställ en fråga nedan och andra användare kommer att svara dig