Phoenix Gold ZDC-VAG2 Bruksanvisning


Läs gratis den bruksanvisning för Phoenix Gold ZDC-VAG2 (3 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 1.5 recensioner. Har du en fråga om Phoenix Gold ZDC-VAG2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
IMPORTANT: Technical knowledge is necessary for installation Please ensure that the
correct tools are using during the installation to avoid damage to the vehicle or product.
Phoenix Gold can not be held responsible for the installation of this product.
PLUG & PLAY DSP AMPLIFER
INSTRUCTION MANUAL
PHOENIXGOLD.COM
V.1.1
STEP 1
ZDC Harness
1. Disconnect the OEM amplifier harness from the OEM amplifier.
2. Connect the fitting end of the ZDC harness to the OEM amplifier.
3. Connect the other end to the OEM amplifier harness to the ZDC harness
4. Run the ZDC harness from the OEM amplifier through the vehicle to the location of where you
will position your amp. We would advise installing the ZDA amplifier in the boot of the vehicle.
NOTE: The information show above is a guide ONLY to installing the ZDA Amp under the passenger seat. Please be
advised that we would also recommend a trained professional auto electrician carry out the install of any of our products.
STEP 2
ZDA Amplifier
OEM Amp
Harness
INSTRUCTION MANUAL
PHOENIXGOLD.COM
OEM Amplifier
OEM Amp
Example: OEM Amplifier located under front seat
ZDA Amplifier
ZDC Harness
OEM Amplifier
OEM Amp
Harness
OEM Amplifier
Prior to installation the vehicle battery should be disconnected so no power is running to
any of the electrics in the vehicle.


Produktspecifikationer

Varumärke: Phoenix Gold
Kategori: ej kategoriserat
Modell: ZDC-VAG2

Behöver du hjälp?

Om du behöver hjälp med Phoenix Gold ZDC-VAG2 ställ en fråga nedan och andra användare kommer att svara dig