Phoenix Technologies Blue Sound Bruksanvisning

Läs gratis den bruksanvisning för Phoenix Technologies Blue Sound (2 sidor) i kategorin hörlur. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 6 recensioner. Har du en fråga om Phoenix Technologies Blue Sound eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

To know more about the headset

Talktime: 15 hours

Music time: 15 hours

Standby time: 300 hours

Bluetooth version: 4.0

Bluetooth profiles: A2DP/HFP/HSP/AVRCP

Solution: CSR

Noise reduction: 2-MIC CVC noise reduction

Wireless range: 10m

Weight: 95g

Size: 155×160×52mm

1

2

3

4

5

6

7

8

9

10

1.Volume up

2.Volume down

3.EQ button

4.Noise cancellation

microphone

5 Multifunction button

6.Track back

7.Track forward

8.Indicator lights

9.Microphone

10.Charger connect.

GET STARTED

Pairing

1. Press and hold the multifunction button about 5

seconds to switch on the headset,it automatically

enters the pairing mode, the red and blue indicator

lights flashes alternately.

2. Activate the Bluetooth feature on your phone or

other devices,and set it to search for new Bluetooth

devices.

Basic operation

1. Adjust the volume: Press volume up or down button

during a call or while listening to music.

Press EQ button to change the 2. EQ equalizer adjuster:

EQ mode(original,bass,treble,rock,pop)

3. Multifunction button: For operations included turn

on/off,pairing,answer/end calls,musi

c play/pause etc.

4. Track back/Forward: To enable music track

back/forward,and scrolling through the current song.

5. Indicator lights: When the headset start pairing,the

red and blue lights flash alternately;red light flashes

once when the headset is turned off;blue light flashes

in every 8 seconds when in standby status; the blue

light flashes continuously when there is incoming

calls;the red indicator light keeps lighting when the

headset is charging;the red light is off and blue light is

on after fully charged.

Calls

CALLS & MUSIC

1. Answer a call: Quickly press the multifunction button

to answer the phone call.

2. End a call: Quickly press the multifunction button to

hang up the phone call during a call.

3. Reject a call: Press and hold the multifunction button

to reject a call.

4. Last number redial: Press the multifunction button

twice to redial last number when the headset is

connected to mobile phone and in standby status.

EASY TO USE

3. Select"Headblue1"from the list of found devices on

your phone or other devices and connect,if

necessary,enter passcode 0000 to pairand connect

the headset to your device. Now you can use

Headblue1 for phone calls or listening to music.

Bluetooth

ON

Search

Bluetooth

ON

Connect

Headblue1

Listen to music (this feature need to be compatible

by mobile phone music player)

1. Music Play/Pause: Quickly press the multifunction button

to pause playing a song during playback,to resume playing

a song,press the multifunction button again.

2. Previous song: Press the track back button quickly to play

previous song during playback.

3. Next song: Press the track forward button quickly to play

next song during playback.

4. Fast forward: Press and hold the track forward button to

fast forward through the current song. Release the button

to resume music play

ing.

5. Rewind: Press and hold the track back button to rewind

through the current song. Release the button to resume

music playing.

6. Switch music and calls: If you receive or make a call while

listening to music,the music is paused until the call ends.

Battery indicator

KNOW MORE

The current battery status of headset will be displayed

in top right corner after the headset connected to iOS

devices.

Listen to music with USB cable

When the headset is turned off,connect the headset

with computer USB port by USB cable,the red

indicator light will be on. The driver is need to be

installed for the first time connecting with computer.

After installation the audio in computer will be

received by headset(Microphone is unavailable when

in USB mode).

5. To switch a call from the headset to the connected

phone: Press and hold the previous song button for

about two seconds to switch the call from the headset

to the connected phone. To switch the call from the

phone to the headset,press and hold the previous

song button for about two seconds again.

Multipoint

1.Press and hold the multifunction button for 6

seconds to switch on the headset,it automatically

enters pairing mode,the red and blue indicator lights

start flashes alternately.

2.Activate the bluetooth feature on the first and the

second mobile phone,and set them to search for the

new bluetooth devices

3.Select 'Headblue1' from the list of found devices on

both mobile phones simultaneously and connect.

Bluetooth

ON

Connect

Headblue1

Bluetooth

ON

Connect

Headblue1

WSHEADNEIRELES PHO

Produktspecifikationer