Pioneer DEH-2000MP Bruksanvisning

Läs gratis den bruksanvisning för Pioneer DEH-2000MP (16 sidor) i kategorin Bilradio/CD-spelare. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 4 recensioner. Har du en fråga om Pioneer DEH-2000MP eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

MANUEL D’INSTALLATION

INSTALLATION MANUAL

DEH-2020MP

DEH-2000MPB

DEH-2000MP

DEH-1020E

DEH-1000E

<KMMZX> <07G00000>

Printed in China 

Imprimé en Chine

<YRD5142-A/S> EW

Important

!Check all connections and systems before

final installation.

!Do not use unauthorized parts.Use of un-

authorizedparts maycause malfunctions.

!Consult your dealer if installationrequires dril-

ling ofholes orothermodifications to the vehi-

cle.

!Donotinstallthisunitwhere :

—it may interferewith operation of thevehi-

cle.

—itmaycauseinjur ytoapassengerasare-

sult of asudden stop.

!The semiconductor laser will be damaged if it

overheats. Installthis unitaway from hot

places such as nearthe heater outlet.

!Optimum performance is obtainedwhen the

unit is installedat an angleof less than 60°.

60°

DIN front/rear mount

This unitcanbeproperlyinstalled eitherfrom

“Front(conventionalDIN front-mount)or”

“ ”Rear(DINrear-mount installation,utilizing

threaded screwholes atthesides ofunitchas-

sis). For details,refer tothe followinginstalla-

tion methods.

DIN Front-mount

Installation withthe rubberbush

1Insert themounting sleeve into the

dashboard.

When installingina shallowspace,use asup-

plied mountingsleeve.Ifthereisenough

space behindthe unit,use factorysupplied

mounting sleeve.

2Secure the mounting sleeveby usinga

screwdriver to bend themetal tabs(90°)

into place.

3Install theunit.

DashboardRubber bush

Mounting sleeveScrew

Removingthe unit

1Extend top and bottom of thetrimring

outwards to remove the trim ring.(When

reattachingthe trimring, pointthe side

with agroove downwardsand attachit.)

Trim ring

!Itbecomes easy to remove the trim ring if

the front panelis released.

2Insert thesupplied extraction keysinto

bothsides ofthe unit untilthey click into

place.

3Pull theunit out ofthe dashboard.

Installation

En

DIN Rear-mount

1Extend top and bottom of thetrimring

outwards to remove the trim ring.(When

reattachingthe trimring, pointthe side

with agroove downwardsand attachit.)

Trim ring

!Itbecomes easy to remove the trim ring if

the front panelis released.

2Determine the appropriate position

where theholes onthe bracket and the

side of the unit match.

3Tighten twoscrews oneach side.

Screw

Mounting bracketDashboard orconsole

!Use either truss screws (5 mm ×8 mm) or

flushsurfacescrews(5 mm ×9 mm),de-

pendingon the shape of screw holes in the

bracket.

Fastening thefront panel

If youdonot planto detachthefront panel,

thefront panelcan be fastenedwith supplied

screw.

Screw

Installation

En

Produktspecifikationer